Disk Test Setup
Disk Test: | DISABLE |
Test Frequency in hours: | 0 |
Test Duration: | Fast |
[CANCEL] | [OK] |
|
|
Disk Test Result: | Disk Failed |
Disk 1: Write Error |
|
Disk 2: Write Error |
|
Use the Jog to move between the menu fields and the Shuttle for the selections within the fields. When satisfied with the selections select OK and press the Enter button to execute.
The Disk Test will run in the background and will not interfere with normal operations. Once the disk test is done, a message will appear on the screen indicating the test result.
Disk Test Result |
| Disk Test Result |
|
| Disk Failure |
Disk Test Success |
| Disk 1:Write Error |
|
| Disk 2:Write Error |
[OK] |
| [OK] |
PASSED | FAILED |
Press the Enter button to clear from the display.
Should a disk test fail, several actions will performed:
∙An icon will be displayed indicating disk failure. 
It is displayed on Monitor A on the bottom of the screen in the middle. This icon will only disappear when the disk is replaced.
∙If the alarm or record email option is enabled in the Email Notification Setup Screen, an email will be sent indicating that a disk failure occurred.
qMain Menu → Record → Record Lock
Use this menu to set the Record Lock feature. This feature disables the front panel record button. Setting Record Lock to ON will start the unit recording if it is not currently in the Record mode.
OFF
ON
40 | DVMRe Triplex |