Changing the Installer or Operator Passwords
To change the password:
1.Highlight the password you wish to change, then press the Enter button. A password box will appear.
2.Enter the new password using the Number buttons.
3.Highlight OK, then press the Enter button.
4.
5.Highlight OK, then press the Enter button. The user will be prompted, indicating if the password was entered correctly and changed.
The Ethernet Password
The Ethernet Password feature limits access to only those users who access the unit using the password feature of WaveReader versions 2.3 or later. When the unit is first setup, the default is No Password Protection. Meaning, anyone using WaveReader and accessing with an ethernet connection can connect to the unit.
Password Box
Enter a new Install Password
Password Box
Enter a new Ethernet Password
Activate The Ethernet Password
1.Enter the new password using the Number buttons.
2.Highlight OK, then press the Enter button.
3.
4.Highlight OK, then press the Enter button. The user will be prompted, indicating if the password was entered correctly and changed.
Deactivate The Ethernet Password
To return the unit to No Ethernet Password Protection, enter the Ethernet Access Reset Password in the password box shown above.
The DDNS Password
The DDNS password enables the DVMRe Triplex to contact the Domain Name Server in order to provide IP to Domain Name translation. You must obtain this number by calling you Domain Name Service. By default this password is 2222. This password is only used when Name Service in the Ethernet Settings Menu is set to GnuDIP.
Ethernet Access Reset Password
1 1 1 1
61 | DVMRe Triplex |