Philips DVDR3425H, DVDR3435H/93 user manual Connecting to a VCR or, Other similar device

Step 2: Optional Connections (continued)

			Back of a VCR
			(Example only)
VHF/UHF	OUT	IN	CABLE
RF IN
	VIDEO	VIDEO
	OUT	IN
	AUDIO	AUDIO
	L	L
VHF/UHF	AUDIO	AUDIO	SATELLITE
RF OUT	R	R
		C	A
			ANTENNA

B

D

English

		Connecting to a VCR or
		other similar device
		This connection enables you to record
		from a video tape to the HDD or a DVD
		recordable disc and allows the VCR to be
e		used for playback if the recorder is
		turned off.
		IMPORTANT!
		Your new recorder can replace the
		VCR for all your recording needs.
		Just unplug all the connections to
		your VCR.
	A Connect the Antenna/Cable TV signal to
		the ANTENNA IN jack on the
		recorder.
	B Use a RF coaxial cable to connect the
		ANTENNA OUT jack on the
		recorder to the Antenna input jack on
O		your TV (VHF/UHF RF IN.)

C Use the audio/video cables to connect the VIDEO/AUDIO IN on the recorder to the matching VIDEO/ AUDIO output jacks on the VCR.

D Use the audio/video cables to connect the VIDEO/AUDIO -OUTon the recorder to the matching VIDEO/ AUDIO input jacks on the TV.

Helpful Hints:

–Most commercial video cassettes and DVDs are copy-protected and therefore cannot be recorded.

–Connect the recorder directly to the

TV. If there is a VCR or an additional device in between, the picture quality may be poor because of the copy protection system built into the recorder.

TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

19