Auto Scan, Manual Program | Philips DVDR3435H/93, DVDR3425H specs

Step 3: Installation and Setup (continued)

GENERAL settings (underlined options are the factory default settings)

English

Auto Scan

SETUP MENU - GENERAL

			Auto Chapter Marker	5min.
			Record Mode	SP
			Timer Setting Menu	OK
			Auto Scan	Search
			Modify Channel	Edit
			Sort Channels	OK

Manual Program

Program Number
			P001

Name			C h 0 0 1
Standard
			PAL B/G
Search Type
			CHANNEL
Band			STANDARD
Frequency			172.25MHz
Fine Tuning
Delete			Ok
OK OK			CANCELOK

Select to start automatic TV channel programming.

AUse  keys to highlight { Auto Scan - Search } and press OK .

 A warning message will appear.

B Select OK OK

and press OK on the remote control

Use  keys to highlight { Default TV System } and press OK, Three Audio mode PAL I , PAL D/K and PAL B/G will appear, select correct mode , then press OK.

*Hint: The set does not support NTSC TV signal in.

Use  keys to highlight { CONTINUE } and press OK on the remote control.

The automatic TV channel search will start. This process may take several minutes. Once complete, the total number of channels found will appear on the TV.

Select to modify your preset TV channels.

AUse  keys to highlight { Modify channel - Edit } and press OK .

The modify channel options will be displayed.

BUse  keys to select one of the options and press  .

{Program Number } – Use CH+/ CH– to select by the program number for modifying.

The number of the current channel, this item can not be modified

{Name } – Use  to select by the channel name for modifying.

{Standard } – Select this to set the system that produces the least distortion of picture and sound. (See chapter “TV System Guide” at the back of this manual for information.)

{Search type } –Use to select scan mode, there are two mode: Frequency and channel: To select Frequency mode, the band item will not be display.

{Band } –The band of this channel, You can select standard or cable.

{Channel } – Use to select and edit channel name.

{Frequency } – Select this to adjust the frequency of the channel.

–Use tu keys to search the next frequency or use the Numeric keypad 0-9to change the frequency. Press OK on the remote control to confirm the setting.

{ Fine Tuning }– Select this to fine-tune the TV channel manually if the reception is poor.

–Use tu keys to fine-tune the frequency.

{delete} – Select this to set the channel to be deleted.

C To confirm the changes, select OK OK and press OK on the remote control to exit to the previous screen.

TIPS: Press u to go access the options of an item in the menu.

Press SETUP to exit the menu.