Philips DVDR3425H Parental Level, Playback limitation level, Alternative scenes, Change Password

English

Setup Menu Options (continued)

PREFERENCES settings (underlined options are the factory default settings)

Parental Level	Some DVDs may have a parental level assigned to the complete
	disc or to certain scenes on the disc. This feature lets you set a
	playback limitation level.
	The rating levels range from 1 to 8 and are country dependent.
	You can prohibit the playing of certain discs that are not
	suitable for your children, or have certain discs played with
	alternative scenes.

•Press u to access this menu and use  keys to select one of the options.

Rating explanations

{1. Kid Safe } ~ { 2. G } – Childsafe; acceptable for viewers of all ages.

{3. PG } – Parental Guidance suggested.

{4. PG13 } – Unsuitable for children under age 13.

{5. PG R } ~ { 6. R } – Restricted; recommended that parents restrict children under 17 from viewing or allow to view only when supervized by a parent or adult guardian.

{7. NC 17 } – No children under age 17; not recommended viewing for children under age 17.

{ 8. Adult } – Mature material; should be viewed only by adults due to graphic sexual material, violence or language.

{ Off } – Parental Control is not active.

DVDs that are rated higher than the level you have selected will not play unless you enter your four-digit pin code.

Change Password

New Password
Enter password	* * * *

Enter new password		* * * *
Re-enter password
OK	CANCELOK

This option allows you to change your password setting for parental control.

AUse  keys to highlight { Change Password } and press OK.

You will be prompted to enter your four-digit pin code.

BUse the Numeric keypad 0-9to enter your four-digit pin code.

When doing this for the first time, enter the default password ‘3308’.

If you forget your four-digit pin code, the default password is 3308.

CEnter your new password.

D Re-enter your new password and select OK OK	, then press OK on
the remote control to confirm.

TIPS: The underlined option is the factory default setting.

Press  to go back to previous menu item. Press SETUP to exit the menu.

64