P A R A M E T E R S
8. PARAMETERS
Depending on its configuration and operation mode, the DSP 244 offers a selection of more or less different parameters. The parameters are assigned to the input channels IN1, IN2, IN1+2 and to the 4 output channels OUT1, OUT2, OUT3, OUT4. The channel number is indicated in the top left corner of the display while the function block (MASTER EQ, MASTER DELAY, CHANNEL EQ, etc.) is shown next to the channel number.
The corresponding parameters appear in the second and third line of the display. A typical “parameter display” looks like this:
The function blocks are arranged in the following sequence:
IN1: | MASTER EQ1 |
IN1: | MASTER EQ2 |
IN1: | MASTER EQ3 |
IN1: | MASTER EQ4 |
IN1: | MASTER EQ5 |
IN1: | MASTER DELAY |
IN2: | MASTER EQ1 |
IN2: | MASTER EQ2 |
IN2: | MASTER EQ3 |
IN2: | MASTER EQ4 |
IN2: | MASTER EQ5 |
IN2: | MASTER DELAY |
IN1+2: MASTER DELAY |
|
OUT1: ROUTING | OUT2: ROUTING |
OUT1: CHANNEL EQ1 | OUT2: CHANNEL EQ1 |
OUT1: CHANNEL EQ2 | OUT2: CHANNEL EQ2 |
OUT1: CHANNEL EQ3 | OUT2: CHANNEL EQ3 |
OUT1: CHANNEL EQ4 | OUT2: CHANNEL EQ4 |
OUT1: HIPASS XOVER | OUT2: HIPASS XOVER |
OUT1: LOPASS XOVER | OUT2: LOPASS XOVER |
OUT1: CHANNEL DELAY | OUT2: CHANNEL DELAY |
OUT1: COMPRESSOR | OUT2: COMPRESSOR |
OUT1: LIMITER | OUT2: LIMITER |
OUT1: LEVEL | OUT2: LEVEL |
OUT3: ROUTING | OUT4: ROUTING |
OUT3: CHANNEL EQ1 | OUT4: CHANNEL EQ1 |
OUT3: CHANNEL EQ2 | OUT4: CHANNEL EQ2 |
OUT3: CHANNEL EQ3 | OUT4: CHANNEL EQ3 |
OUT3: CHANNEL EQ4 | OUT4: CHANNEL EQ4 |
OUT3: HIPASS XOVER | OUT4: HIPASS XOVER |
OUT3: LOPASS XOVER | OUT4: LOPASS XOVER |
OUT3: CHANNEL DELAY | OUT4: CHANNEL DELAY |
OUT3: COMPRESSOR | OUT4: COMPRESSOR |
OUT3: LIMITER | OUT4: LIMITER |
OUT3: LEVEL | OUT4: LEVEL |
All parameters, their adjustment ranges, and all additional information about use and effect of the different functions are explained in detail in the following chapters.