
Press the fabric cover at the front outward over the side frame tubes, until the hole in the frame tube is exposed.
Working from the front (between the fabric and the side frame tube), lay the aluminium profile of the telescopic tube on top of the side frame tube and, still working from the front, insert the counter sunk bolt through the holes in the aluminium profile and side frame tube.
Fitted telescopic tube, shown from inside the trailer.
Fitted telescopic tube, shown from the front.
Using a Philips crosshead screwdriver and an 11mm spanner, screw on the nylok nut and tighten gently.
Attach the aluminium profile of the telescopic tube to the other side of the trailer in exactly the same way.
Tighten both nylok nuts fully.
1.2 Securing the Baby Seat
Rear view of the baby seat with fastex insert and unit that fits the fastex buckles on the safety belts of the Chariot CTS trailers.
The baby seat can be either fitted to one side or in the centre.
For side fitting both ends of the seat belt of the appropriate side are needed and for centre fitting both centre ends of both seat belts.
For this the fastex unit on the end of the right belt (as seen in the direction of travel) and the fastex insert on the end of the left belt (as seen in the direction of travel) must be attached.
Fastex insert and unit for side fitting.
Fastex insert and unit for centre fitting.
16