WebLink Set/Get/Do Commands
weblink.ip.conn[12].retry_interval
weblink.ip.conn[12].retry_interval
57
Description This command sets the number of seconds between attempts to connect to the server URL provided in weblink.ip.conn1.location. If an attempt is unsuccessful or the connection is lost, the printer will wait 'retry_interval' seconds before attempting to connect again.
^JUF, ^JUS, ^JUN, ^JUA, and device.restore_defaults do not have any affect on this setting.
Supported Devices
•iMZ 220™, iMZ 320™
•QLn220™, QLn320™, QLn420™
•ZT210™, ZT220™, ZT230™
Type setvar, getvar, do
Commands Details
setvar | This command sets the number of seconds to wait before attempting to reconnect to the | ||
| server. |
| |
| Format: | ||
| • | ! U1 | setvar "weblink.ip.conn1.retry_interval" "value" |
| • | ! U1 | setvar "weblink.ip.conn2.retry_interval" "value" |
| Values: 1 ‐ 600 | ||
| Default: "10" | ||
|
| ||
getvar | This command returns the number of seconds to wait between connection attempts. | ||
Format:
| • | ! | U1 | getvar "weblink.ip.conn1.retry_interval" |
| • | ! | U1 | getvar "weblink.ip.conn2.retry_interval" |
|
| |||
do | This command sets the number of seconds to wait before attempting to reconnect to the | |||
| server. |
| ||
Format:
•! U1 do "weblink.ip.conn1.retry_interval" "value"
•! U1 do "weblink.ip.conn2.retry_interval" "value"
Values: 1 ‐ 600
Default: "10"
1/20/15 |