WebLink Set/Get/Do Commands
weblink.ip.conn[12].test.test_on
weblink.ip.conn[12].test.test_on
Description This command determines when the test connection should be attempted. This assists in debugging the printer's connection to remote servers when there are issues with the main weblink connection (conn1 or conn2).
^JUF, ^JUS, ^JUN, ^JUA, and device.restore_defaults do not have any affect on this setting.
Supported Devices
•iMZ 220™, iMZ 320™
•QLn220™, QLn320™, QLn420™
•ZT210™, ZT220™, ZT230™
Type setvar, getvar, do
Commands | Details |
| |
|
| ||
setvar | This command indicate when the test connection should be attempted. | ||
| Format: | ||
| • | ! U1 | setvar "weblink.ip.conn1.test.test_on" "value" |
| • | ! U1 | setvar "weblink.ip.conn2.test.test_on" "value" |
| Values: off,failure,interval,both | ||
| Default: "failure" | ||
|
| ||
getvar | This command retrieves the test connection setting. | ||
Format:
| • | ! | U1 | getvar "weblink.ip.conn1.test.test_on" |
| • | ! | U1 | getvar "weblink.ip.conn2.test.test_on" |
|
| |||
do | This command sets when the test connection should be attempted. | |||
Format:
•! U1 do "weblink.ip.conn1.test.test_on" "value"
•! U1 do "weblink.ip.conn2.test.test_on" "value"
Values: off,failure,interval,both
Default: "failure"
61
1/20/15 |