WebLink Set/Get/Do Commands
weblink.logging.max_entries
weblink.logging.max_entries
Description This command specifies the maximum number of individual log entries that will be stored in the weblink.logging.entries command.
Important • Changes to this command are immediate and may result in some log entries being lost. If there are N log entries currently in the log, the user sets the max_entires to M, where M is less than N, the oldest
^JUF, ^JUS, ^JUN, ^JUA, and device.restore_defaults do not have any affect on this setting.
Supported Devices
•iMZ 220™, iMZ 320™
•QLn220™, QLn320™, QLn420™
•ZT210™, ZT220™, ZT230™
Type setvar, getvar, do
Commands | Details |
|
|
setvar | This command sets the maximum number of log entires that will be stored. |
| Format: ! U1 setvar "weblink.logging.max_entries" "value" |
| Values: 0 ‐ 10000 |
| Note • Setting the value to 0 disables logging. |
| Default: "0" |
|
|
getvar | This command returns the setting for the maximum number of log entries that will be stored. |
| Format: ! U1 getvar "weblink.logging.max_entries" |
|
|
do | This command sets the maximum number of log entires that will be stored. |
| Format: ! U1 do "weblink.logging.max_entries" "value" |
| Values: 0 ‐ 10000 |
| Note • Setting the value to 0 disables logging. |
| Default: "0" |
|
|
65
1/20/15 |