WebLink Set/Get/Do Commands
weblink.ip.conn[12].proxy
weblink.ip.conn[12].proxy
Description This command assigns the URL of the proxy for the connection.
The proxy server protocol, port, domain, username, and password are all encoded into the URL via the format outlined in RFC2396 (http://www.ietf.org/rfc/rfc2396.txt).
The username and password must avoid the invalid characters listed in RFC2396 (e.g. ':', '@', '/', etc). If an invalid character must be used it needs to be escaped using '%' as described in RFC2396.
^JUF, ^JUS, ^JUN, ^JUA, and device.restore_defaults do not have any affect on this setting.
Supported Devices
•iMZ 220™, iMZ 320™
•QLn220™, QLn320™, QLn420™
•ZT210™, ZT220™, ZT230™
Type setvar, getvar, do
Commands | Details |
|
|
setvar | This command assigns the URL of the connection proxy. |
Format:
•! U1 setvar "weblink.ip.conn1.proxy" "url"
•! U1 setvar "weblink.ip.conn2.proxy" "url"
Values:
•Any valid URL up to 2048 characters
•Expected URL format: [httphttps]://[user:pass@]domain[:port]/[path]
•The URL will need to be built according to the server/proxy environment the printer is running within.
| Default: "" |
| • The user:pass, port, and path are all optional. |
| • The default scheme must be either HTTPS or HTTP. The default is HTTP. |
| • The default port is 1080. |
| • The default is to omit the username and password. |
|
|
getvar | This command retrieves the URL of the connection proxy. |
Format:
•! U1 getvar "weblink.ip.conn1.proxy"
•! U1 getvar "weblink.ip.conn2.proxy"
55
1/20/15 |