Mount the Control Box and Receiver, Receiver cable

Mount the Control Box and Receiver

Step 1

Mount the control box using the screws (provided) or another secure mounting method. The control box must be mounted at least 3 feet above the ground to protect it from rain splash, snow, etc., and at least 3 feet from an AC power source to prevent electrical interference.

Step 2

Temporarily mount the receiver at this time. You will need to use the transmitter (page 17) to check the range of the receiver before permanently mounting it. You may have to try different locations before permanently mounting the receiver. The receiver range can vary from 50 to 100 feet depending upon weather, topography, and external interference.

Mount the receiver:

•Ensuring a line-of-sight between transmitter and antenna.

•At least 3 feet away from AC voltage.

•As high as possible for optimum range.

•DO NOT mount receiver upside down.

•DO NOT mount receiver on metal fence or post (this will decrease signal range). If attaching receiver to metal fence, you should mount receiver on a piece of wood attached to the fence (see illustration).

The receiver cable:

•Cable length is 10 ft. (receivers with longer cables are available as special order items; call the GTO Sales Department).

•NEVER splice receiver cable!

•Run the receiver cable through PVC conduit to protect it from damage.

•DO NOT run cable in conduit containing AC wiring.

Use mounting			FUSE
Use mounting			25	BATT+
				BATT-
holes and screws
provided to mount	INPUTS	OUTPUTS
control box to a	POWER	CONTROL
control box to a		AUX	SLAVE INPUTS	MASTER INPUTS	RECEIVER
		RLY	SLAVE CABLE	MASTER CABLE	CONTROL INPUTS
secure surface.

Receiver mounted

on piece of wood

This device complies with FCC rules Part 15. Operation is subject to the following conditions:

1.This device may not cause harmful interference.

2.This device must accept an interference that may cause undesired operation.

Transmitter distance may vary due to circumstances beyond our control. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.