Graco manual EQ300C and EQ600C Parts List, Pressure POT

Page 35

							Parts
EQ300C and EQ600C Parts List
Ref.	Part	Description	Qty.	Ref.	Part	Description	Qty.
1		PRESSURE POT, 6.5	1	10		HOSE, abrasive	1
		cf, assy				media, 1 1/2 in.
2		ENCLOSURE, blast, 1	1		EQ1943	EQ300S Models
		1/2 in. npt			EQ5208	EQ600S Models
		EQ300S Models		12		ADAPTER, cam	1
		EQ600S Models		12		ADAPTER, cam	1
		EQ600S Models				groove, type F, ss
4		LABEL, branding	1		EQ1934	EQ300S Models
5	17D786	KIT, replacement, hose	1		EQ1046	EQ600S Models
		restraint		14	206994	FLUID, TSL, 8 oz.	1
	17D787	KIT, replacement,				bottle
7		coupler pin		16	EQ1881	HOSE, tubing, natural,	2
7		VALVE, abrasive,	1			1/4 in.
	EQ5149	media, 1 1/2 in.		17	111743	WASHER, flat	4
	EQ5149	EQ300S Models		18	EQ1273	HOSE, tubing, natural,	4
	EQ5135	EQ600S Models		18	EQ1273	HOSE, tubing, natural,	4
	EQ5135	EQ600S Models				3/8 in.
9	EQ5183	CABLE, cord, electric,	1	19	EQ1151	NUT, nylok, ss, 3/8–16	4
		blast control		22	EQ1519	BOLT, hex head, ss,	4
						1/2-13 x 1–1

334667B

35

Image 35

Contents EcoQuip Vapor Abrasive Blast System Important Safety InstructionsRelated Manuals ModelsDust and Debris Hazard Burn Hazard Compressor Size and Hose Length Minimum ID Metric OEM System GuidelinesMetric EQ300C and EQ600C System Component IdentificationDataTrak see DataTrak Controls, DataTrak ControlsKey Pressure Relief Procedure Operation Checklist Before StartingConnecting the Blast Hose and Air Hose Setting Up the Equipment 10 gal 200-500 lb Ti24824a 0 0 0 8 8 0 0 0 3 Blasting on Higher Surfaces Blasting TipsSteel Metering Valve SettingsGrit Size Blast Pressure Abrasive Dose Blast Angle General WoodUsing the Wash Feature Refilling the Pot with Abrasive Shutting Down Operation Winterizing the Equipment See Repairing the Main Air Regulator TroubleshootingProblem Cause Solution See Cleaning the Auto-Vent Valve,Intact. See Hose Schematic, See Setting Up the Equipment,See Repairing the Diaphragm Valve Procedure see Shutting Down,Setting Up the Equipment, Properly. See Hose Schematic,Metering Valve Settings, See Pressure Relief Procedure,If flushing does not solve the problem, see Checking for Leaks Troubleshooting ExamplesPneumatic Blast Control Circuit Repair Repairing the Main Air RegulatorPerform Pressure Relief Procedure, Flushing the Diaphragm Valve Perform the Pressure Relief Procedure, Repairing the Diaphragm ValveCleaning the Auto-Vent Valve Approved Batteries Replacing the DataTrak BatteryReplace Battery Approved Fuses DataTrak Part Series Letter Fuse Required Replacing the DataTrak FuseReplace Fuse EQ300C and EQ600C PartsPressure POT EQ300C and EQ600C Parts ListEnclosure Part Description Qty Enclosure Parts ListRef. Part Description Qty Pressure Pot Parts ListPressure Pot Hose Schematic Model Series Brakes Vapor Abrasive Blast Systems and AccessoriesEcoQuip Skid Systems EcoQuip Trailer SystemsModel Description Mobile/Skid UnitsTrailer Units ModelModel Description Type Length Blast Control HosesNozzles Common Spare Parts Other AccessoriesDimensions EQ600S Technical SpecificationsEQ300S Graco Information Graco Extended Warranty for EcoQuip Components