Graco EQ300C manual Hoses, Nozzles, Model Description Type Length Blast Control

Page 42

Vapor Abrasive Blast Systems and Accessories

Hoses

	Model	Description	Type	Length	Blast Control	ID	Model
	EQ5237	Blast Hose	Extension	15 m (50 ft)	Pneumatic	1.0 in.	EQ100,
							EQ200,
	EQ5235	Blast Hose	Extension	15 m (50 ft)	Electric	1.0 in.	EQ200,
							EQ300
	EQ5236	Blast Hose	Replacement	15 m (50 ft)	Pneumatic	1.0 in.	EQ300
	EQ5236	Blast Hose	Replacement	15 m (50 ft)	Pneumatic	1.0 in.
	EQ5234	Blast Hose	Replacement	15 m (50 ft)	Electric	1.0 in.
	EQ5077	Blast Hose	Extension	30 m (100 ft)	Pneumatic	1.25 in.	EQ400,
							EQ600
	EQ5084	Blast Hose	Extension	30 m (100 ft)	Electric	1.25 in.	EQ600
	EQ5082	Blast Hose	Extension	15 m (50 ft)	Electric	1.25 in.
	EQ5073	Blast Hose	Extension	15 m (50 ft)	Pneumatic	1.25 in.
	EQ5071	Blast Hose	Replacement	15 m (50 ft)	Pneumatic	1.25 in.
	EQ5080	Blast Hose	Replacement	15 m (50 ft)	Electric	1.25 in.

Model	Description
17D786	Hose restraint
17D787	Coupler pin
17C459	Blast hose coupler gasket, hose end
17C124	Blast hose coupler gasket, machine end
17C125	Gasket, cam/groove, abrasive blast line – 1.25 in. ID (EQ300)
17C453	Gasket, cam/groove, abrasive blast line – 1.5 in. ID (EQ600)
EQ5183	Cable, battery
17D788	Replacement handle, pneumatic blast control
17D791	Replacement handle, electric blast control

Nozzles

Model	Description
EQ1710	Standard #7 (EQ100, EQ300, EQ200T)
EQ1711	Standard #8 (EQ600, EQ400T)
EQ7073*	High performance #7 (EQ100, EQ300, EQ200T)
EQ7074*	High performance #8 (EQ600, EQ400T)
EQ5166	Nozzle extension, 24 in.

*Performance nozzles require 100 psi (7 bar, 0.7 MPa) or more air pressure at nozzle.

42

334667B

Image 42

Contents Important Safety Instructions EcoQuip Vapor Abrasive Blast SystemModels Related ManualsDust and Debris Hazard Burn Hazard OEM System Guidelines MetricCompressor Size and Hose Length Minimum ID Metric System Component Identification EQ300C and EQ600CDataTrak Controls KeyDataTrak see DataTrak Controls, Pressure Relief Procedure Checklist Before Starting OperationConnecting the Blast Hose and Air Hose Setting Up the Equipment 10 gal 200-500 lb Ti24824a 0 0 0 8 8 0 0 0 3 Blasting Tips Blasting on Higher SurfacesWood Metering Valve SettingsGrit Size Blast Pressure Abrasive Dose Blast Angle General SteelUsing the Wash Feature Refilling the Pot with Abrasive Shutting Down Operation Winterizing the Equipment See Cleaning the Auto-Vent Valve, TroubleshootingProblem Cause Solution See Repairing the Main Air RegulatorProcedure see Shutting Down, See Setting Up the Equipment,See Repairing the Diaphragm Valve Intact. See Hose Schematic,See Pressure Relief Procedure, Properly. See Hose Schematic,Metering Valve Settings, Setting Up the Equipment,If flushing does not solve the problem, see Troubleshooting Examples Checking for LeaksPneumatic Blast Control Circuit Repairing the Main Air Regulator Perform Pressure Relief Procedure,Repair Flushing the Diaphragm Valve Repairing the Diaphragm Valve Perform the Pressure Relief Procedure,Cleaning the Auto-Vent Valve Replacing the DataTrak Battery Replace BatteryApproved Batteries Replacing the DataTrak Fuse Replace FuseApproved Fuses DataTrak Part Series Letter Fuse Required Parts EQ300C and EQ600CEQ300C and EQ600C Parts List Pressure POTEnclosure Enclosure Parts List Part Description QtyPressure Pot Parts List Pressure PotRef. Part Description Qty Hose Schematic EcoQuip Trailer Systems Vapor Abrasive Blast Systems and AccessoriesEcoQuip Skid Systems Model Series BrakesModel Mobile/Skid UnitsTrailer Units Model DescriptionHoses NozzlesModel Description Type Length Blast Control Other Accessories Common Spare PartsDimensions Technical Specifications EQ300SEQ600S Graco Extended Warranty for EcoQuip Components Graco Information