Graco EQ300C manual Burn Hazard

Page 4

Warnings

WARNING

BURN HAZARD

Equipment surfaces and fluid that is heated can become very hot during operation. To avoid severe burns:

• Do not touch hot fluid or equipment.

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent, in work area can ignite or explode. To help prevent fire and explosion:

• Use equipment only in well ventilated area.

• Abrasive material exiting blast nozzle can generate sparks. When flammable liquids are used near the blast nozzle or for flushing or cleaning, keep the blast nozzle at least 20 feet (6 meters) away from explosive vapors.

•Keep work area free of debris, including solvent, rags and gasoline.

•Keep a working fire extinguisher in the work area.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work area to help prevent serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. Protective equipment includes but is not limited to:

•Protective eye wear

•Protective shoes

•Gloves

•Hearing protection

•Properly fit-tested and government approved respirator suitable for the dust conditions

RECOIL HAZARD

Blast nozzle may recoil when triggered. If you are not standing securely, you could fall and be seriously injured.

4

334667B

Image 4

Contents Important Safety Instructions EcoQuip Vapor Abrasive Blast SystemModels Related ManualsDust and Debris Hazard Burn Hazard Metric OEM System GuidelinesCompressor Size and Hose Length Minimum ID Metric System Component Identification EQ300C and EQ600CKey DataTrak ControlsDataTrak see DataTrak Controls, Pressure Relief Procedure Checklist Before Starting OperationConnecting the Blast Hose and Air Hose Setting Up the Equipment 10 gal 200-500 lb Ti24824a 0 0 0 8 8 0 0 0 3 Blasting Tips Blasting on Higher SurfacesMetering Valve Settings Grit Size Blast Pressure Abrasive Dose Blast Angle GeneralWood SteelUsing the Wash Feature Refilling the Pot with Abrasive Shutting Down Operation Winterizing the Equipment Troubleshooting Problem Cause SolutionSee Cleaning the Auto-Vent Valve, See Repairing the Main Air RegulatorSee Setting Up the Equipment, See Repairing the Diaphragm ValveProcedure see Shutting Down, Intact. See Hose Schematic,Properly. See Hose Schematic, Metering Valve Settings,See Pressure Relief Procedure, Setting Up the Equipment,If flushing does not solve the problem, see Troubleshooting Examples Checking for LeaksPneumatic Blast Control Circuit Perform Pressure Relief Procedure, Repairing the Main Air RegulatorRepair Flushing the Diaphragm Valve Repairing the Diaphragm Valve Perform the Pressure Relief Procedure,Cleaning the Auto-Vent Valve Replace Battery Replacing the DataTrak BatteryApproved Batteries Replace Fuse Replacing the DataTrak FuseApproved Fuses DataTrak Part Series Letter Fuse Required Parts EQ300C and EQ600CEQ300C and EQ600C Parts List Pressure POTEnclosure Enclosure Parts List Part Description QtyPressure Pot Pressure Pot Parts ListRef. Part Description Qty Hose Schematic Vapor Abrasive Blast Systems and Accessories EcoQuip Skid SystemsEcoQuip Trailer Systems Model Series BrakesMobile/Skid Units Trailer UnitsModel Model DescriptionNozzles HosesModel Description Type Length Blast Control Other Accessories Common Spare PartsDimensions EQ300S Technical SpecificationsEQ600S Graco Extended Warranty for EcoQuip Components Graco Information