Graco EQ300C manual Technical Specifications, EQ300S, EQ600S

Page 45

 

 

 

Technical Specifications

Technical Specifications

 

 

 

 

 

 

EQ300S

 

U.S.

Metric

Maximum Working Pressure

 

125 psi

8.6 bar, 0.86 MPa

Operating Temperature

 

35° – 110° F

1.6° – 43.3° C

Air Consumption

 

165 – 375 cfm

4.67–10.62 m^3/min

Blast Hose Size

 

1 in. ID

25.4 mm ID

Abrasive Capacity

 

400 – 500 lb

181 – 227 kg

Dry Weight

 

450 lb

204 kg

Wet Weight

 

1600 lb

726 kg

Pressure Pot Volume

 

6.5 cubic feet

184 liters

Compressor Size and Hose Length (Minimum ID)

 

 

 

185–600 cfm compressor and less than 100 ft

 

1.5 in.

38 mm

hose length

 

 

 

Over 600 cfm or greater then 100 ft. hose length

 

2 in.

51 mm

Sound Data*

 

 

 

Sound Pressure Level

 

133 dB(A)

133 dB(A)

Sound Power Level

 

139 dB(A)

139 dB(A)

Instantaneous Sound Pressure Level

 

131 dB(C)

131 dB(C)

*All readings were taken at the maximum system

blast pressure 125 psi (8.6 bar,

0.86 MPa) from the operator

position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614–2.

 

 

 

EQ600S

 

U.S.

Metric

Maximum Working Pressure

 

125 psi

8.6 bar, 0.86 MPa

Operating Temperature

 

35° – 110° F

1.6° – 43.3° C

Air Consumption

 

375 – 600 cfm

10.62–17.0 m^3/min

Blast Hose Size

 

1.25 in. ID

31.75 mm ID

Abrasive Capacity

 

400 – 500 lb

181 – 227 kg

Dry Weight

 

450 lb

204 kg

Wet Weight

 

1600 lb

726 kg

Pressure Pot Volume

 

6.5 cubic feet

184 liters

Compressor Size and Hose Length (Minimum ID)

 

 

 

185–600 cfm compressor and less than 100 ft

 

1.5 in.

38 mm

hose length

 

 

 

Over 600 cfm or greater then 100 ft. hose length

 

2 in.

51 mm

Sound Data*

 

 

 

Sound Pressure Level

 

133 dB(A)

133 dB(A)

Sound Power Level

 

139 dB(A)

139 dB(A)

Instantaneous Sound Pressure Level

 

131 dB(C)

131 dB(C)

*All readings were taken at the maximum system

blast pressure 125 psi (8.6 bar,

0.86 MPa) from the operator

position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614–2.

334667B

45

Image 45
Contents EcoQuip Vapor Abrasive Blast System Important Safety InstructionsRelated Manuals ModelsDust and Debris Hazard Burn Hazard OEM System Guidelines MetricCompressor Size and Hose Length Minimum ID Metric EQ300C and EQ600C System Component IdentificationDataTrak Controls KeyDataTrak see DataTrak Controls, Pressure Relief Procedure Operation Checklist Before StartingConnecting the Blast Hose and Air Hose Setting Up the Equipment 10 gal 200-500 lb Ti24824a 0 0 0 8 8 0 0 0 3 Blasting on Higher Surfaces Blasting TipsGrit Size Blast Pressure Abrasive Dose Blast Angle General Metering Valve SettingsWood SteelUsing the Wash Feature Refilling the Pot with Abrasive Shutting Down Operation Winterizing the Equipment Problem Cause Solution TroubleshootingSee Cleaning the Auto-Vent Valve, See Repairing the Main Air RegulatorSee Repairing the Diaphragm Valve See Setting Up the Equipment,Procedure see Shutting Down, Intact. See Hose Schematic,Metering Valve Settings, Properly. See Hose Schematic,See Pressure Relief Procedure, Setting Up the Equipment,If flushing does not solve the problem, see Checking for Leaks Troubleshooting ExamplesPneumatic Blast Control Circuit Repairing the Main Air Regulator Perform Pressure Relief Procedure,Repair Flushing the Diaphragm Valve Perform the Pressure Relief Procedure, Repairing the Diaphragm ValveCleaning the Auto-Vent Valve Replacing the DataTrak Battery Replace BatteryApproved Batteries Replacing the DataTrak Fuse Replace FuseApproved Fuses DataTrak Part Series Letter Fuse Required EQ300C and EQ600C PartsPressure POT EQ300C and EQ600C Parts ListEnclosure Part Description Qty Enclosure Parts ListPressure Pot Parts List Pressure PotRef. Part Description Qty Hose Schematic EcoQuip Skid Systems Vapor Abrasive Blast Systems and AccessoriesEcoQuip Trailer Systems Model Series BrakesTrailer Units Mobile/Skid UnitsModel Model DescriptionHoses NozzlesModel Description Type Length Blast Control Common Spare Parts Other AccessoriesDimensions Technical Specifications EQ300SEQ600S Graco Information Graco Extended Warranty for EcoQuip Components