Graco EQ300C manual Hose Schematic

Page 39

Hose Schematic

Hose Schematic

Ref.	Part	Cut Length		Ref.	Part	Cut Length
28	EQ1296	42.0	in.	40	EQ1883	32.0	in.
29	EQ1882	16.0	in.	40	EQ1883	20.75 in.
35	EQ1273	12.25 in.		41	EQ1884	7.38	in.
35	EQ1273	2.88	in.	41	EQ1884	10.5	in.
35	EQ1273	5.5 in.		41	EQ1884	11.25 in.
35	EQ1273	21.0	in.	41	EQ1884	19.88 in.
37	EQ1297	24.5	in.	42	EQ1885	34.5	in.
37	EQ1273	2.25	in.	42	EQ1885	17.0	in.
39	EQ1881	21.75 in.

334667B

39

Image 39

Contents EcoQuip Vapor Abrasive Blast System Important Safety InstructionsRelated Manuals ModelsDust and Debris Hazard Burn Hazard OEM System Guidelines MetricCompressor Size and Hose Length Minimum ID Metric EQ300C and EQ600C System Component IdentificationDataTrak Controls KeyDataTrak see DataTrak Controls, Pressure Relief Procedure Operation Checklist Before StartingConnecting the Blast Hose and Air Hose Setting Up the Equipment 10 gal 200-500 lb Ti24824a 0 0 0 8 8 0 0 0 3 Blasting on Higher Surfaces Blasting TipsSteel Metering Valve SettingsGrit Size Blast Pressure Abrasive Dose Blast Angle General WoodUsing the Wash Feature Refilling the Pot with Abrasive Shutting Down Operation Winterizing the Equipment See Repairing the Main Air Regulator TroubleshootingProblem Cause Solution See Cleaning the Auto-Vent Valve,Intact. See Hose Schematic, See Setting Up the Equipment,See Repairing the Diaphragm Valve Procedure see Shutting Down,Setting Up the Equipment, Properly. See Hose Schematic,Metering Valve Settings, See Pressure Relief Procedure,If flushing does not solve the problem, see Checking for Leaks Troubleshooting ExamplesPneumatic Blast Control Circuit Repairing the Main Air Regulator Perform Pressure Relief Procedure,Repair Flushing the Diaphragm Valve Perform the Pressure Relief Procedure, Repairing the Diaphragm ValveCleaning the Auto-Vent Valve Replacing the DataTrak Battery Replace BatteryApproved Batteries Replacing the DataTrak Fuse Replace FuseApproved Fuses DataTrak Part Series Letter Fuse Required EQ300C and EQ600C PartsPressure POT EQ300C and EQ600C Parts ListEnclosure Part Description Qty Enclosure Parts ListPressure Pot Parts List Pressure PotRef. Part Description Qty Hose Schematic Model Series Brakes Vapor Abrasive Blast Systems and AccessoriesEcoQuip Skid Systems EcoQuip Trailer SystemsModel Description Mobile/Skid UnitsTrailer Units ModelHoses NozzlesModel Description Type Length Blast Control Common Spare Parts Other AccessoriesDimensions Technical Specifications EQ300SEQ600S Graco Information Graco Extended Warranty for EcoQuip Components