Kodak i800 Series manual Adjusting the side guides on the input tray

Page 13

Maximum document batch height for automatic feeding

Downward and upward curl documents

Adjusting the side guides on the input tray

2-4

When feeding batched documents, the maximum height of the batched documents is 10.2 cm (4 in.), approximately 1000 sheets of 75g (20 lb.) paper. The elevator tray can be set to accommodate 25-, 250- 500-, 750- 1000-document stacks.

The elevator tray can handle some amount of lead edge curl, but to ensure reliable feeding the curl should be at a minimum. It is suggested that you try and minimize the curl before scanning by stacking the documents on a flat surface for a period of time to help flatten the documents.

To accommodate multiple applications with variable feeding requirements, the side guides can be adjusted for center- or edge-feeding. Center- feeding is recommended for best paper handling performance. The side guides can be moved together or independently.

1.Pull the guides all the way out and then push them together (toward the center) to reset.

2.Open the side guides slightly wider than the documents you will be feeding.

3.Place the documents in the elevator tray.

4.Adjust the side guides to fit the documents.

A-61169 July 2003

Image 13

Contents User’s Guide ElectroMagnetic Compatibility Statements User PrecautionsPeoples Republic of China Class a Japan Class aIntroduction Product description Standard features Resolutions Standard configurations Transport speedDimension Minimum Maximum Operational Mode SpeedsScanner specifications Back of scanner Equipment disposal InformationTurning on the scanner To turn on the scanner Using the ScannerJuly July Adjusting the side guides on the input tray Adjusting the output tray Press Start/Resume Scanning documents∙ Press Stop/Pause Continuous and manual feeding Loading long documents in the feederFeeding thick documents Operator Control Panel Functions Scanner Enabling and disablingDisabled scanner functions Navigating through the functions on the control panel menu July Mode Running in count-onlyPress Start/Resume Press Stop/Pause Changing the alarm Using the SettingsVolume MenuContrast To 4 = lightest, 4 = darkest Changing the displayTermination Changing the ScsiJuly Press Start/Resume Jogging the transport Programmable key assignments Document Printer Document Printer and Patch ReaderJuly July July Replacing the ink Improper ink flowCartridge Locking bar July July Position Setting the printerPatch types Patch ReaderLeading Edge July Cleaning the paper path MaintenanceCleaning the upper transport area Vacuum the area Close the top turn baffle July Transport area Cleaning the verticalCleaning the transport area Lift the roller cover and vacuum the sensors July Cleaning the printer and patch head Cleaning the imaging guides Maintenance and replacement procedures Replacing the feed module Replacing the feed module and feed module tiresModule tires Replacing the feedInstall each new tire by gently stretching it over the core Replacing the separation roller Separation roller and tiresRoller tires Replacing the separationChanging the separation PadReplacing lamps Cleaning the feed module tires and separation roller tiresJuly Position the new lamp in the lamp holder July Customizing the side guides for self- centering feeding July Changing the output tray side guides July Description CAT No Ordering suppliesClearing the document path Front cover accessTop cover access Clearing the document path bi-fold door access July Message Listing Message Clean the S1 sensor Action Message Clean imaging guides ActionMessage Clean the S2 sensor Action Message Error Reset Scanner ActionMessage Front image cal unsuccessful Action Message Description Feeder self test failed ActionMessage Image address field overflow Action Message Image buffer almost full ActionMessage Description Mechanical cal unsuccessful Action Message Power-on self-test succeeded ActionMessage Motor self test failed Action Message Multi-feed count ActionMessage Description Print head not present Action Message Settings conflict ActionMessage Rear image cal unsuccessful Action Message Refeed document set ActionMessage Unable to execute command Action Message Description Unable to enable ActionDocument sensor LocationProblem Possible Solutions Problem solving chartProblem Possible Solutions Maintenance Problem Possible Solutions Eastman Kodak Company

Related manuals

Manual 123 pages 35.98 Kb