Kodak i800 Series manual Document Printer and Patch Reader

4 Document Printer and Patch Reader

The Document Printer

Printed information

This chapter provides instructions for using the Kodak Imagelink Document Printer 1 and the Patch Reader. The following can be found in this chapter:

∙Purging the ink cartridge

∙Replacing the ink cartridge

∙Replacing the ink blotter strips

∙Setting the printer position

∙Patch types supported by the Patch Reader

∙Setting the Patch Reader position

The Document Printer 1 uses a standard ink cartridge, which is an inexpensive and effective way to apply information to the scanned document and utilize document management systems such as batching and time-stamping.

The Document Printer 1 provides a print capability that is programmed to support alphanumeric characters as defined by the host. It supports date, image address, time, document count and custom messages. All print information is captured in a document header record. All printer controls and functions are accessible via the ISIS and TWAIN drivers.

The information printed by the Document Printer is defined during application setup by your system administrator or integrator.

Any combination of the following items can be printed, provided the total length does not exceed 40 characters.

∙Document image address (any, all or none of the four image address fields, in any order)

∙Date

∙Time

∙Document count

∙Messages - up to 6 fields can be defined to build a print string

A-61169 July 2003 4-1