Kodak i800 Series manual Maintenance

Page 81

 

Problem

 

 

Possible Solutions

 

 

 

 

 

 

 

 

The output tray cannot be

 

 

Make sure the output tray is installed properly.

 

 

adjusted in or out

 

 

 

 

 

 

 

 

 

 

 

 

Roller marks appear on

 

 

Clean the feed module rollers, separation rollers and transport rollers (see Chapter

 

 

documents after scanning

 

 

5, Maintenance).

 

 

 

 

 

 

 

 

 

Vertical streaks appear on

 

 

∙

Be sure when you calibrate the scanner that you are using a good, clean

 

 

 

 

 

calibration target. Use the calibration target provided with your scanner.

 

 

the image

 

 

 

 

 

 

 

 

Additional calibration targets can be ordered. See Chapter 5, Maintenance,

 

 

 

 

 

 

 

 

 

 

 

 

“Ordering Supplies” for more information.

 

 

 

 

 

∙

The imaging guides may be dirty. Clean the imaging guides. For procedures

 

 

 

 

 

 

see Chapter 5, Maintenance, “Cleaning the imaging guides”.

 

 

 

 

 

 

 

 

The document printer is not

 

 

If you are having problems printing on scanned documents:

 

 

printing as desired

 

 

∙

the tip of the ink cartridge may be plugged. Purge the ink cartridge as

 

 

 

 

 

 

 

 

 

 

 

instructed in Chapter 4, Document Printer and Patch Reader. If the ink still

 

 

 

 

 

 

does not flow properly, replace the ink cartridge. Dispose of used ink

 

 

 

 

 

 

cartridges properly.

 

 

 

 

 

∙

verify that the ink cartridge is not empty. The ink bladder inside the ink

 

 

 

 

 

 

cartridge is flat when it is empty.

 

 

 

 

 

∙

make sure that the ink cartridge is properly installed in the Document Printer.

 

 

 

 

 

∙

make sure that the ink cartridge is located in the correct position for printing.

 

 

 

 

 

∙

make sure that the ink cartridge carrier is properly seated in its slot.

 

 

 

 

 

∙

verify that all printer connectors are securely fastened and that the printer

 

 

 

 

 

 

cables are securely in the white clip and are not folded or creased.

 

 

 

 

 

∙

verify that the printer has been enabled through the host and that the expected

 

 

 

 

 

 

print string has been specified.

 

 

 

 

 

∙

conduct a Print Test via the Operator Control Panel (see Chapter 3, Operator

 

 

 

 

 

 

Control Panel Functions, “Performing a print test”.

 

 

 

 

 

 

 

 

White lines appear at the

 

∙

The imaging guides may be dirty. Clean the imaging guides. For procedures

 

 

 

 

 

see Chapter 5, Maintenance, “Cleaning the imaging guides”.

 

 

top of the image and run

 

 

 

 

 

 

 

 

 

 

 

through the documents

 

∙

Check for scratches on the imaging guides. If scratches are on the imaging

 

 

 

 

 

 

guides, change them. For procedures see Chapter 5, Maintenance.

 

 

 

 

 

 

 

 

A-61169 July 2003

6-13

Page 80 Page 82
Image 81
Page 80 Page 82
Contents User’s Guide ElectroMagnetic Compatibility Statements User PrecautionsPeoples Republic of China Class a Japan Class aIntroduction Product description Standard features Resolutions Standard configurations Transport speedDimension Minimum Maximum Operational Mode SpeedsScanner specifications Back of scanner Equipment disposal InformationTurning on the scanner To turn on the scanner Using the ScannerJuly July Adjusting the side guides on the input tray Adjusting the output tray Scanning documents Press Start/Resume∙ Press Stop/Pause Continuous and manual feeding Loading long documents in the feederFeeding thick documents Operator Control Panel Functions Scanner Enabling and disablingDisabled scanner functions Navigating through the functions on the control panel menu July Mode Running in count-onlyPress Start/Resume Press Stop/Pause Changing the alarm Using the SettingsVolume MenuContrast To 4 = lightest, 4 = darkest Changing the displayTermination Changing the ScsiJuly Press Start/Resume Jogging the transport Programmable key assignments Document Printer Document Printer and Patch ReaderJuly July July Improper ink flow Replacing the inkCartridge Locking bar July July Position Setting the printerPatch types Patch ReaderLeading Edge July Cleaning the paper path MaintenanceCleaning the upper transport area Vacuum the area Close the top turn baffle July Transport area Cleaning the verticalCleaning the transport area Lift the roller cover and vacuum the sensors July Cleaning the printer and patch head Cleaning the imaging guides Maintenance and replacement procedures Replacing the feed module Replacing the feed module and feed module tiresModule tires Replacing the feedInstall each new tire by gently stretching it over the core Replacing the separation roller Separation roller and tiresRoller tires Replacing the separationChanging the separation PadReplacing lamps Cleaning the feed module tires and separation roller tiresJuly Position the new lamp in the lamp holder July Customizing the side guides for self- centering feeding July Changing the output tray side guides July Description CAT No Ordering suppliesClearing the document path Front cover accessTop cover access Clearing the document path bi-fold door access July Message Listing Message Clean the S1 sensor Action Message Clean imaging guides ActionMessage Clean the S2 sensor Action Message Error Reset Scanner ActionMessage Front image cal unsuccessful Action Message Description Feeder self test failed ActionMessage Image address field overflow Action Message Image buffer almost full ActionMessage Description Mechanical cal unsuccessful Action Message Power-on self-test succeeded ActionMessage Motor self test failed Action Message Multi-feed count ActionMessage Description Print head not present Action Message Settings conflict ActionMessage Rear image cal unsuccessful Action Message Refeed document set ActionMessage Unable to execute command Action Message Description Unable to enable ActionDocument sensor LocationProblem Possible Solutions Problem solving chartProblem Possible Solutions Maintenance Problem Possible Solutions Eastman Kodak Company
Related manuals
Manual 123 pages 35.98 Kb
Top Page Image Contents