Kodak i800 Series manual Using the Scanner, Turning on the scanner To turn on the scanner

2 Using the Scanner

This chapter provides the following operational procedures:

∙Turning on the scanner

∙Document preparation

∙Adjusting the input tray, side guides and output tray

∙Scanning documents

∙Feeding long documents

∙Continuous and manual feeding

Other functions, such as calibration, using the programmable keys, using multi-feed detection, setting the elevator level, etc. can be performed using the Operator Control Panel. See Chapter 3, Operator Control Panel Functions for procedures.

Turning on the scanner To turn on the scanner:

∙Toggle the power switch to the On position.

On/Off switch

When the menu bar is displayed on the Operator Control Panel, the scanner is Ready.

IMPORTANT: Always power-up the scanner to its Ready state before powering-up the host computer.

A-61169 July 2003 2-1