Kodak i800 Series manual Customizing the side guides for self- centering feeding

Page 64

Customizing the side guides for self- centering feeding

A-61169 July 2003

A spacer is installed in the output tray, which allows the side guides to move independently. If you want the side guides to move together (self- centering) you can install the geared spacer that is included with the scanner. To change the side guides for self-centering feeding, follow the procedures below.

Tools needed: Phillips Head Screwdriver

1. Pull the output tray forward and remove it.

2.Open the side guides to the widest position, remove the end stop and turn the tray upside down.

End stop

5-21

Image 64

Contents User’s Guide User Precautions ElectroMagnetic Compatibility StatementsJapan Class a Peoples Republic of China Class aIntroduction Product description Standard features Standard configurations Transport speed ResolutionsDimension Minimum Maximum Operational Mode SpeedsScanner specifications Back of scanner Information Equipment disposalUsing the Scanner Turning on the scanner To turn on the scannerJuly July Adjusting the side guides on the input tray Adjusting the output tray Press Start/Resume Scanning documents∙ Press Stop/Pause Loading long documents in the feeder Continuous and manual feedingFeeding thick documents Operator Control Panel Functions Enabling and disabling ScannerDisabled scanner functions Navigating through the functions on the control panel menu July Running in count-only ModePress Start/Resume Press Stop/Pause Using the Settings Changing the alarmVolume MenuChanging the display Contrast To 4 = lightest, 4 = darkestChanging the Scsi TerminationJuly Press Start/Resume Jogging the transport Programmable key assignments Document Printer and Patch Reader Document PrinterJuly July July Replacing the ink Improper ink flowCartridge Locking bar July July Setting the printer PositionPatch Reader Patch typesLeading Edge July Maintenance Cleaning the paper pathCleaning the upper transport area Vacuum the area Close the top turn baffle July Cleaning the vertical Transport areaCleaning the transport area Lift the roller cover and vacuum the sensors July Cleaning the printer and patch head Cleaning the imaging guides Maintenance and replacement procedures Replacing the feed module and feed module tires Replacing the feed moduleReplacing the feed Module tiresInstall each new tire by gently stretching it over the core Separation roller and tires Replacing the separation rollerReplacing the separation Roller tiresChanging the separation PadCleaning the feed module tires and separation roller tires Replacing lampsJuly Position the new lamp in the lamp holder July Customizing the side guides for self- centering feeding July Changing the output tray side guides July Ordering supplies Description CAT NoFront cover access Clearing the document pathTop cover access Clearing the document path bi-fold door access July Message Listing Message Clean imaging guides Action Message Clean the S1 sensor ActionMessage Clean the S2 sensor Action Message Error Reset Scanner ActionMessage Description Feeder self test failed Action Message Front image cal unsuccessful ActionMessage Image address field overflow Action Message Image buffer almost full ActionMessage Power-on self-test succeeded Action Message Description Mechanical cal unsuccessful ActionMessage Motor self test failed Action Message Multi-feed count ActionMessage Settings conflict Action Message Description Print head not present ActionMessage Rear image cal unsuccessful Action Message Refeed document set ActionMessage Description Unable to enable Action Message Unable to execute command ActionDocument sensor LocationProblem solving chart Problem Possible SolutionsProblem Possible Solutions Maintenance Problem Possible Solutions Eastman Kodak Company

Related manuals

Manual 123 pages 35.98 Kb