Kodak i800 Series manual July

Page 51

6.Vacuum the floor of the horizontal transport area.

7.Wipe the upper and lower sensors with a lint-free cloth.

8.Reinstall the horizontal belt module.

9.Lower the horizontal transport plate.

5-8	A-61169 July 2003

Image 51

Contents User’s Guide ElectroMagnetic Compatibility Statements User PrecautionsPeoples Republic of China Class a Japan Class aIntroduction Product description Standard features Speeds Standard configurations Transport speedResolutions Dimension Minimum Maximum Operational ModeScanner specifications Back of scanner Equipment disposal InformationTurning on the scanner To turn on the scanner Using the ScannerJuly July Adjusting the side guides on the input tray Adjusting the output tray Scanning documents Press Start/Resume∙ Press Stop/Pause Continuous and manual feeding Loading long documents in the feederFeeding thick documents Operator Control Panel Functions Scanner Enabling and disablingDisabled scanner functions Navigating through the functions on the control panel menu July Mode Running in count-onlyPress Start/Resume Press Stop/Pause Menu Using the SettingsChanging the alarm VolumeContrast To 4 = lightest, 4 = darkest Changing the displayTermination Changing the ScsiJuly Press Start/Resume Jogging the transport Programmable key assignments Document Printer Document Printer and Patch ReaderJuly July July Improper ink flow Replacing the inkCartridge Locking bar July July Position Setting the printerPatch types Patch ReaderLeading Edge July Cleaning the paper path MaintenanceCleaning the upper transport area Vacuum the area Close the top turn baffle July Transport area Cleaning the verticalCleaning the transport area Lift the roller cover and vacuum the sensors July Cleaning the printer and patch head Cleaning the imaging guides Maintenance and replacement procedures Replacing the feed module Replacing the feed module and feed module tiresModule tires Replacing the feedInstall each new tire by gently stretching it over the core Replacing the separation roller Separation roller and tiresPad Replacing the separationRoller tires Changing the separationReplacing lamps Cleaning the feed module tires and separation roller tiresJuly Position the new lamp in the lamp holder July Customizing the side guides for self- centering feeding July Changing the output tray side guides July Description CAT No Ordering suppliesClearing the document path Front cover accessTop cover access Clearing the document path bi-fold door access July Message Listing Message Error Reset Scanner Action Message Clean imaging guides ActionMessage Clean the S1 sensor Action Message Clean the S2 sensor ActionMessage Image buffer almost full Action Message Description Feeder self test failed ActionMessage Front image cal unsuccessful Action Message Image address field overflow ActionMessage Multi-feed count Action Message Power-on self-test succeeded ActionMessage Description Mechanical cal unsuccessful Action Message Motor self test failed ActionMessage Refeed document set Action Message Settings conflict ActionMessage Description Print head not present Action Message Rear image cal unsuccessful ActionLocation Message Description Unable to enable ActionMessage Unable to execute command Action Document sensorProblem Possible Solutions Problem solving chartProblem Possible Solutions Maintenance Problem Possible Solutions Eastman Kodak Company

Related manuals

Manual 123 pages 35.98 Kb