Kodak i800 Series manual Press Stop/Pause

Page 25

Performing a patch test Use this test to verify that the Patch Reader is operational and that your patches are within specification.

To perform a patch test:

1.Select the Diagnostics Settings menu icon.

2.Use the right or left arrow to navigate to the Diagnostics function.

3.Press the down arrow until Run Patch test is displayed on the Operator Control Panel.

4.Select Return.

5.Feed a document(s) with a patch(es).

6.Press Start/Resume . When the documents have been scanned, the document count and number of patch types recognized by the scanner will be displayed.

7.Press Stop/Pause.

3-8	A-61169 July 2003

Image 25

Contents User’s Guide ElectroMagnetic Compatibility Statements User PrecautionsPeoples Republic of China Class a Japan Class aIntroduction Product description Standard features Resolutions Standard configurations Transport speedDimension Minimum Maximum Operational Mode SpeedsScanner specifications Back of scanner Equipment disposal InformationTurning on the scanner To turn on the scanner Using the ScannerJuly July Adjusting the side guides on the input tray Adjusting the output tray Press Start/Resume Scanning documents∙ Press Stop/Pause Continuous and manual feeding Loading long documents in the feederFeeding thick documents Operator Control Panel Functions Scanner Enabling and disablingDisabled scanner functions Navigating through the functions on the control panel menu July Mode Running in count-onlyPress Start/Resume Press Stop/Pause Changing the alarm Using the SettingsVolume MenuContrast To 4 = lightest, 4 = darkest Changing the displayTermination Changing the ScsiJuly Press Start/Resume Jogging the transport Programmable key assignments Document Printer Document Printer and Patch ReaderJuly July July Replacing the ink Improper ink flowCartridge Locking bar July July Position Setting the printerPatch types Patch ReaderLeading Edge July Cleaning the paper path MaintenanceCleaning the upper transport area Vacuum the area Close the top turn baffle July Transport area Cleaning the verticalCleaning the transport area Lift the roller cover and vacuum the sensors July Cleaning the printer and patch head Cleaning the imaging guides Maintenance and replacement procedures Replacing the feed module Replacing the feed module and feed module tiresModule tires Replacing the feedInstall each new tire by gently stretching it over the core Replacing the separation roller Separation roller and tiresRoller tires Replacing the separationChanging the separation PadReplacing lamps Cleaning the feed module tires and separation roller tiresJuly Position the new lamp in the lamp holder July Customizing the side guides for self- centering feeding July Changing the output tray side guides July Description CAT No Ordering suppliesClearing the document path Front cover accessTop cover access Clearing the document path bi-fold door access July Message Listing Message Clean the S1 sensor Action Message Clean imaging guides ActionMessage Clean the S2 sensor Action Message Error Reset Scanner ActionMessage Front image cal unsuccessful Action Message Description Feeder self test failed ActionMessage Image address field overflow Action Message Image buffer almost full ActionMessage Description Mechanical cal unsuccessful Action Message Power-on self-test succeeded ActionMessage Motor self test failed Action Message Multi-feed count ActionMessage Description Print head not present Action Message Settings conflict ActionMessage Rear image cal unsuccessful Action Message Refeed document set ActionMessage Unable to execute command Action Message Description Unable to enable ActionDocument sensor LocationProblem Possible Solutions Problem solving chartProblem Possible Solutions Maintenance Problem Possible Solutions Eastman Kodak Company

Related manuals

Manual 123 pages 35.98 Kb