Kodak i800 Series manual Vacuum the area Close the top turn baffle

Page 46

6. Place the upper imaging guide on a clean surface.

NOTE: To avoid getting any debris (from the cleaning process) on the imaging guides, they will be reinstalled after the scanner is thoroughly cleaned.

7. Release the top turn baffle.

Top turn baffle

Exit transport plate

8.Vacuum the area.

9.Close the top turn baffle.

A-61169 July 2003

5-3

Image 46

Contents User’s Guide User Precautions ElectroMagnetic Compatibility StatementsJapan Class a Peoples Republic of China Class aIntroduction Product description Standard features Dimension Minimum Maximum Operational Mode Standard configurations Transport speedResolutions SpeedsScanner specifications Back of scanner Information Equipment disposalUsing the Scanner Turning on the scanner To turn on the scannerJuly July Adjusting the side guides on the input tray Adjusting the output tray Press Start/Resume Scanning documents∙ Press Stop/Pause Loading long documents in the feeder Continuous and manual feedingFeeding thick documents Operator Control Panel Functions Enabling and disabling ScannerDisabled scanner functions Navigating through the functions on the control panel menu July Running in count-only ModePress Start/Resume Press Stop/Pause Volume Using the SettingsChanging the alarm MenuChanging the display Contrast To 4 = lightest, 4 = darkestChanging the Scsi TerminationJuly Press Start/Resume Jogging the transport Programmable key assignments Document Printer and Patch Reader Document PrinterJuly July July Replacing the ink Improper ink flowCartridge Locking bar July July Setting the printer PositionPatch Reader Patch typesLeading Edge July Maintenance Cleaning the paper pathCleaning the upper transport area Vacuum the area Close the top turn baffle July Cleaning the vertical Transport areaCleaning the transport area Lift the roller cover and vacuum the sensors July Cleaning the printer and patch head Cleaning the imaging guides Maintenance and replacement procedures Replacing the feed module and feed module tires Replacing the feed moduleReplacing the feed Module tiresInstall each new tire by gently stretching it over the core Separation roller and tires Replacing the separation rollerChanging the separation Replacing the separationRoller tires PadCleaning the feed module tires and separation roller tires Replacing lampsJuly Position the new lamp in the lamp holder July Customizing the side guides for self- centering feeding July Changing the output tray side guides July Ordering supplies Description CAT NoFront cover access Clearing the document pathTop cover access Clearing the document path bi-fold door access July Message Listing Message Clean the S2 sensor Action Message Clean imaging guides ActionMessage Clean the S1 sensor Action Message Error Reset Scanner ActionMessage Image address field overflow Action Message Description Feeder self test failed ActionMessage Front image cal unsuccessful Action Message Image buffer almost full ActionMessage Motor self test failed Action Message Power-on self-test succeeded ActionMessage Description Mechanical cal unsuccessful Action Message Multi-feed count ActionMessage Rear image cal unsuccessful Action Message Settings conflict ActionMessage Description Print head not present Action Message Refeed document set ActionDocument sensor Message Description Unable to enable ActionMessage Unable to execute command Action LocationProblem solving chart Problem Possible SolutionsProblem Possible Solutions Maintenance Problem Possible Solutions Eastman Kodak Company

Related manuals

Manual 123 pages 35.98 Kb