Kodak i800 Series manual Jogging the transport Programmable key assignments

Jogging the transport

Programmable key assignments

3-14

The Jog button temporarily (4 seconds) turns on the transport to help clear a document jam. This function is only available when the scanner is disabled. The Jog button is intended to clear simple document jams. If documents are lodged in several locations within the scanner, use the procedures in Chapter 6, Troubleshooting/Messages.

If a document jam occurs:

∙Select the Jog icon.

There are three programmable keys on the Operator Control Panel. These keys can be assigned functions by the host application.

Programmable keys are available for use when the scanner is enabled. The Operator Control Panel displays the numbers 1 through 3. These numbers correspond to the buttons on the Control Panel.

Each of the programmable keys can be assigned the following functions:

∙No Scanner Functionality (default)

∙Scanner End-of-Job

∙Terminate Batch

∙Skip Multi-feed Detection

∙Skip Printing

∙Skip Patch Recognition

Check with your System Administrator to determine what functions are programmed.

A-61169 July 2003