Edimax Technology IC-7000 user manual

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

zOpen and execute CAM_EZ Search (as shown in Figure 3). The system will scan the IP-CAM that you just installed automatically. Then, you will find 255IC-7000 in the column of Camera Lists. Click 255IC-7000 with left mouse button. You can see the default settings for IP-CAM.

	Step 1.	Click Update. You can see 255 IC-7000.
	Step 2.	Click 255 IC-7000. You can see
		Name	: IC-7000
		IP	: 192.168.2.3
		SubMask ：255.255.255.0
		GateWay ：192.168.2.254
		HTTP Port：Http communication port. The
	default setting is 80.
		(If you have multiple IP-CAMs installed in
	the same network, you have to divide them with
	different Port numbers, e.g, 1025、1026、1039….)
		UDP Port : UDP port，Pre-setting is 1500
Figure 3	Step 3.	Make sure the IP setting is STATIC.

zFill static IP Address as shown below. (If you do not know your IP address, please contact your ISP. An example of static IP Address modification.is shown below)

Step 4. Type Fixed IP.

Name	: IC-7000
IP	: 211.78.174.94

SubMask ：255.255.255.248

GateWay ：211.78.174.89

HTTP Port：Http communication port. The default setting is 80.

(If you have multiple IP-CAMs installed in the same network, you have to divide them with different Port numbers, e.g, 1025、 1026、1039…..)

UDP Port : UDP Port，Pre-setting is 1500 Step 5. Choose STATIC.

Step 6. After finishing the settings, click Submit. The network settings for IC-7000 IP-CAM will be renewed.

IC-7000 USER’S GUIDE PAGE 13/62 Rev. PV1.0