Edimax Technology IC-7000 user manual 25/62

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

2.5INSTALLATION PROCEDURE FOR NETWORK ENVIRONMENT WITH RESIDENTIAL ROUTER

When a residential router is installed in network, IP-CAM can obtain a dynamic IP address from the DHCP server of residential router. If you want to access IP-CAM from internet, a static private IP address must be assigned to IP-CAM.

(1)Please use CAM_EZ Search to set a static IP address for IP-CAM, e.g., 192.168.0.120 and change the http port number (1025~35534). ( refer to Figure 1)

Figure 1

(2)Type admin to access into ADSL router’s web configuration. (Refer to Figure 2)

NOTE: The following setup procedure may very when you’re using different residential router, please refer to the user manual of your residential router to get instructed.

Figure 2

IC-7000 USER’S GUIDE PAGE 25/62 Rev. PV1.0