Edimax Technology IC-7000 user manual Dhcp IP Address Setting

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

Example:

1.Set up the IP CAM with static IP address.

2.Turn on your computer and launch IE browser. Type 211.78.174.94:( 1025、

1026、1039….) in the Address line. Now you	the monitoring screen on
web browser.

2.4-2 DHCP - IP Address Setting:

zUse RJ-45 Ethernet cable (red) to connect ADSL host and LAN hub. Then use RJ-45 Ethernet cable (blue) to connect PC and IP CAM (as shown below).

zConnect the power adaptor to the power port (on the rear) of IP-CAM. Now, the status LED on the top of IP-CAM will be illuminated.

zSet up the connection way inside the PC network: Please go to

IC-7000 USER’S GUIDE PAGE 14/62 Rev. PV1.0