Edimax Technology IC-7000 user manual Dhcp

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

Control Panel--->Network Connections---> Choose Activated LAN connection ---> right click your mouse ---> Select Properties(P)---> Select Internet Protocol (TCP/IP)---> Select Properties(R)

--->ClickObtain an IP address automatically(O), Obtain DNS server address automatically(B).

Obtain an IP address automatically (O)

Obtain DNS server address automatically (B)

zStart CAM_EZ Search utility (as shown in Figure 3). Press Update to scan the IP-CAM that you just installed automatically. Then, you will find 255IC-7000 in the column of Camera Lists. Click 255IC-7000 with left mouse button. You can see the default settings for IP-CAM.

Step 1.	Click Update. You can see 255 IC-7000.
Step 2.	Click 255 IC-7000. You can see
	Name	: IC-7000
	IP	: 192.168.2.3
	SubMask ：255.255.255.0
	GateWay ：192.168.2.254
	HTTP Port：Http communication port. The
default setting is 80.
Step 3.	Choose	DHCP.

Step 4. After finishing the settings, click Submit. The network settings for IP CAM IP-CAM will be renewed. (That is, you can obtain a virtual IP address)

IC-7000 USER’S GUIDE PAGE 15/62 Rev. PV1.0