Edimax Technology IC-7000 user manual Motion detection can exist PC and SD Card

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

-In 160x120 resolution, the motion detection is fixed to the entire image.

Note:

1.Motion detection can exist PC and SD Card **

2.Image will be stored to ‘C: \tmp\webmd’ directory.

4.5 MOTOR CONTROL

1. — Home , return to the middle place.

2. — Up, press it to move camera up.

3. — Down , press it to move camera down.

4. — Left, press it to move camera left.

5. — Right , press it to move camera right.

6. — Auto , after press this bottom, camera will pan between left and right automatically.

5.ADVANCED APPLICATION

This section describes the advanced settings of the IC-7000 IP-CAM, including:

-Image Setup

-Capture View

-Network Setup

-Server Setup

-Event Trigger Setup

-Administration Setup

-Software Update

5.1IMAGE SETUP

This includes:

-Resolution:Users can select between image resolution of 160x120, 320x240, and 640x480. The default resolution is 320x240.

-Quality: Users can select between “fine”, “normal”, and “basic” image quality. The default image quality is “basic”.

-Anti-Flicker:Users can select between 60Hz for USA and Canada, 50Hz for Australia and Europe, or Outdoor for when you are using this camera in an environment without artificial light; The default setting is 50Hz.

-Audio:Audio output. Default setting is “off”.

-Rotate 180: This setting turns the image upside-down for when the camera is mounted to a ceiling; Default setting is “off”.

-IR Auto Detection:IR LED will be activated automatically when there’s no enough light. Default setting is “on”

-Message: LiveView characters are hidden，Default setting is “on”**

Instructions for image setup:

Step 1. Click to enter imageset menu, the default settings are shown

IC-7000 USER’S GUIDE PAGE 37/62 Rev. PV1.0