Edimax Technology IC-7000 user manual IP Assignment, PPPoE

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

IP Assignment:

Static IP Assignment refers to the IP address assigned by your ISP (or IT department of your company)

IP Address: Includes Static, DHCP and PPPoE. IP addresses assigned through DHCP and PPPoE are generally dynamic.

When using the “Static” setting, you must enter the following information:

-IP Address:The IP address of the IP CAM

-Subnet Mask:Set by default to 255.255.255.0

-Gateway:Default gateway

When using the “DHCP” setting, you do not need to enter any of the above settings.

When using the “PPPoE” setting, you must enter your PPPoE account and password.

5.4.2PPPoE

This menu allows you to enter the dial-up settings when you’re using PPPoE. You have to enter PPPoE ID and password here.

How to Setup PPPoE

Step 1. Enter your PPPoE user ID in the “Account” field.

Step 2. Enter your PPPoE password in the “Password” field.

Step 3. Click Submit to complete setup procedure.

IC-7000 USER’S GUIDE PAGE 41/62 Rev. PV1.0