`
IC-7000 CAM User’s Guide
Pan/Tilt IP Surveillance Camera
and port settings of camera to make proper configuration.
4.To view the image of IP-CAM from remote computer: Launch IP browser and type the public IP address of the residential router and the port number of IP-CAM, e.g., http:// 211.78.174.01:1025
Scenario 4
The way to access Internet | ADSL or Cable Modem |
Public IP address required? | Yes, one public address is required |
| |
DHCP server required? | No |
Network Setup for IP -CAM | LAN Enable / Manually |
This scenario is best for: | Users with one public physical IP address and |
| one IP-CAM. |
1.Connect the red test network cable to the RJ-45 Ethernet jack located on the rear of IP-CAM. The other end is connected to the network card of computer.
2.Refer to 2.4-1 STATIC – IP Address Settings to input IP address properly.
3.Set up the IP-CAM with a public IP address.
4.To view the image of IP-CAM from remote computer: Launch IP browser and type the public IP address of the residential router and the port number of IP-CAM, e.g., http:// 211.78.174.01:1025
IC-7000 USER’S GUIDE | PAGE 21/62 | Rev. PV1.0 |