Edimax Technology IC-7000 user manual HOW to Connect the Camera to TV SET

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

1.7HOW TO CONNECT THE CAMERA TO TV SET

Adapter

TV_OUT

Cable

Reset Switch

z1. Insert the TV_OUT cable to the TV-Out jack located at the back of camera, as shown in Figure (1).

z2. Connect the power adapter to camera, as shown in Figure (2). Press and hold Reset switch for three seconds. Then, release it. The camera will switch to TV_OUT mode.

z3.How to use TV_OUT function:

a.Hold to change TV output mode: Default TV-OUT mode is NTSC, if you want to use PAL system, press and hold Reset switch about three seconds to switch TV output mode between NTSC and PAL system.

b.Push to exit : Press Reset button to access into TV screen and adjustable 50Hz,60Hz,Outdoor

IC-7000 USER’S GUIDE PAGE 8/62 Rev. PV1.0