Edimax Technology IC-7000 user manual 48/62

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

Step 9. Login onto IP CAM and type the Account ID and Password.

Step10. Check current firmware version again to make sure the update is successfully completed.

Note: DO NOT disconnect the network connection between your computer and IP-CAM during update, otherwise, the firmware inside the IP-CAM may corrupt and the IP-CAM will not be function again. In case this happens, please contact your dealer of purchase for help.

※It’s highly recommend to follow the connection method described in section 2.2. Launch the browser and log onto network monitoring screen, then perform update procedure. (This is to avoid any risks about network connection that could be happen during update )

IC-7000 USER’S GUIDE PAGE 48/62 Rev. PV1.0