Edimax Technology IC-7000 user manual 19/62

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

2.Refer to 2.4-1 STATIC – IP Address Settings to input the IP address properly.

3.Set a static public IP address for each IP-CAM.

4.To view the image of IP-CAM from remote computer: Open IP browser and type in the IP address of the IP-CAM, e.g., http://211.78.174.03.

Scenario 2

The way to access Internet	ADSL or Cable Modem
Public IP address required?	Yes, only one public IP address is required
DHCP server required?	Yes
Network Setup for IP -CAM	LAN Enable / Manually
	Every IP-CAM need an unique port number
This scenario is best for:	Users with one public fixed IP addresses,
	residential router and several IP-CAMs
	installed in local network.

1.Set a public IP address (e.g., 211.78.174.01) for the public IP of residential router. Then, set the private IP address and activate the DHCP server function of residential router.

2.In the IP configuration for each IP-CAM, please assign different private IP address. In the Http Port setting, please give every IP CAM an unique port number. (Please

IC-7000 USER’S GUIDE PAGE 19/62 Rev. PV1.0