Edimax Technology IC-7000 user manual 22/62

`

		IC-7000 CAM User’s Guide
		Pan/Tilt IP Surveillance Camera
Scenario 5
	The way to access Internet	ADSL or Cable Modem
	Public IP address required?	Yes, one dynamically-allocated public IP
		address is required
	DHCP server required?	No
	Network Setup for IP -CAM	PPPoE function should be set, LAN Enable
	This scenario is best for:	Users with dial-up ADSL, and one IP-CAM
		installed

1.Please obtain the PPPoE username and password from your ISP.

2.Connect the red test network cable to the RJ-45 Ethernet jack located on the rear of IP-CAM. The other end is connected to the network card of computer.

3.Refer to 2.4-3 PPPoE - IP Address Settings to input account name and password.

4.Please setup the Mail server setup information in IP-CAM setup utility.

5.Activate the Dial up function of IP-CAM to get connected to internet by ADSL Modem.

6.When the dial-up is successful, IP-CAM will send a notification e-mail of dynamic IP Address to the users.

7.Launch IE browser and type in the public IP address (such public IP is dynamically-allocated by your ISP) of the IP-CAM, e.g., http://211.78.174.94.

IC-7000 USER’S GUIDE PAGE 22/62 Rev. PV1.0