Edimax Technology IC-7000 user manual Package Contents

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

‹Obtain IP address from DHCP server, or manually setting. (Also supports PPPoE protocol when used with DSL lines).

‹Build-in web server.

‹Remote image capture (JPG format), remote video recording (AVI format).

‹Microphone : High touch 10φ-40db±3

‹Video output frequency: 50 Hz for PAL、60 Hz for NTSC

‹Night vision: Auto and Manual (Selectable), IR LED x 6/ 5φ/850λ

‹Monitoring angle: Vertical angle: Up/Down Tilt +180 to –35 degrees

Horizontal angle: Left / Right Pan +/- 175 degrees

‹Standard RJ-45 network connector, support 10/100 Mbps Ethernet.

‹5V/ 1.5A switching power supply.

1.4PACKAGE CONTENTS

1.IC-7000 Pan/Tilt IP-Camera

2.Power adaptor, 5V/ 1.5A power supply.

3.Ethernet Cable(red), used to connect to the network card of PC for testing purpose and camera configuration.

4.Ethernet Cable (blue), used to connect to Hub, ADSL modem, residential router.

5.TV-OUT A/V Cable

6.Setup CD

7.User’s Guide (You’re reading now!)

8.Accessory for mounting camera.

1.5SYSTEM REQUIREMENT

PC

‹Processor: Intel Pentium 4 ® 1.4GHz or above is recommended

‹RAM: 256MB or more.

‹Operation System: Windows 2000® or Windows XP®

‹Hard Disk: More than 10MB or more available disk spaces. Network

‹Network Interface: 10/100/1000 Ethernet interface..

IC-7000 USER’S GUIDE PAGE 6/62 Rev. PV1.0