JVC VN-C215V4U manual Restrictions on Clients, Control via customized application software

Page 15

Restrictions on Clients

It is possible for VN-C215V4U to permit or deny image acquisition of designated IP addresses.

Control via customized application software

The following uses are also possible by developing a customized application software that supports the API of VN-C215V4U.

For details, please refer to the [API Guide] in the attached CD-ROM.

●Monitoring via the computer while at the same time recording images to the HDD.

●Recording by changing the frame size/frame rate during alarm occurrence.

●Recording the type and time of alarm occurrence to the computer.

●For detailed usage of VN-C215V4U , please refer to [INSTRUCTIONS] (pdf) in the supplied CD-ROM.

15

Image 15

Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Important Safeguards Safety PrecautionsFor USA and Canada Business users Other Countries outside the European Union Dear CustomerSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Saving Energy MaintenanceOthers Copyrights of videoCamera unit Name and Function of PartsStrap Power supply/Alarm signal cable a PgReset Reset button Camera unit/Inside the cameraInside the camera Lens section Iris Level Iris level adjustment dialFocus adjustment ring Zoom adjustment ringSaving Jpeg images to the FTP server at regular intervals FeaturesAlarm Monitoring Via Built-in ViewerControl via customized application software Restrictions on ClientsMounting the Camera Overall ProceduresMounting on a ceiling SetupSelecting Mounting Method Mounting MethodLoosen the pan fastening screw ConnectionRemove the inner dome Remove the outer case Image adjustment Mounting Mounting the Dome Cover Fall-prevention wire is not supplied Configure image settings. a PgHitch the fall-prevention wire that was Mount the fall-prevention wire onTurn the camera in the clockwise direction Tighten the Camera Fastening Screws and secure the cameraWind the waterproof tape. a Pg Connecting Mount by allowing the cable to exit from the sideMounting the camera to the electrical box Mounting Power Connection Using the PoEWhat is PoE Power over Ethernet? Connecting to the DC12 V power supply About the power cable120 190 LAN Cable Connection Alarm Input/Output Cable Connection When connecting to a hub When connecting to a computerImage adjustment Adjusting field angle, focus and brightness Adjusting the camera shooting directionMounting the Dome Cover Field angle adjustmentFocus adjustment Brightness adjustmentNetwork Requirements a Assigning an IP address from the Dhcp server IP Address SettingsSetting IP address with the default VN- C215V4U settings System configuration required for setting IP address IP Address setting at the computer Click StartClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Top page of VN-C215V4U appears Basic page with the IP address settings appearsWhen the IP address of VN-C215V4U is unknown When the IP address of VN-C215V4U is knownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Http//192.168.0.2/cgi-bin/c215viewing.cgi Installing the built-in viewerEnter the user name and password Viewer is installed and launchedScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Enter the URL of the built-in viewer in the URL field Shortcut for Built-in ViewerGeneral SpecificationsLAN Specifications Attachments/AccessoriesSR55 Dimension Unit mminchesPage Page Camera