JVC VN-C215V4U manual Connecting to the DC12 V power supply, About the power cable, 120 190

Page 25

Connecting to the DC12 V power supply

Connect this product to the DC12 V power supply when not using the PoE.

Connect the polarity correctly.

Red : DC12V+

Black : DC12V-

Note：

●Make sure to select only one mode of electrical supply. Connecting the power cable and the LAN cable for the PoE at the same time may result in failure or malfunction of the camera.

Power cable

Black: DC12 V-	Red: DC12 V+
Solder or	Solder or
crimp	crimp

	Wind the	Insulation tape Insulation tape
	waterproof	Insulation tape Insulation tape
	waterproof
	tape.

Warning

The rated power of this product is DC12 V. Make sure to use it with the correct voltage. Supplying a power different from the rated value may result in failures and in the worst scenario, smoking and fire.

Memo：

●In a system where multiple units of VN- C215V4U are used, turn on the power of only 1 unit to configure the IP address settings via the Internet Explorer. Upon doing so, turn on the power of the second unit and configure accordingly. Configure the camera settings using the same procedure.

●Whenever duplication of IP addresses occurs, check that there is only one VN- C215V4U under the same LAN environment and wait for at least 10 minutes. Access to VN-C215V4U may be denied unless you restore the power supply of all network devices under the same LAN environment.

●To use AA-P700 in the power supply unit, connect one unit of this product. Also refer to the AA-P700 instruction manual.

Memo：

About the power cable

●When using 2-core VVF (Vinyl-insulated vinyl-sheath cable), the connection distance is as follows: (Reference value)

Maximum	40	120	190
extension (m)

Conductor	R1.0 and	R1.6 and	R2.0 and
Diameter (mm)	above	above	above

25

Image 25

Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Important Safeguards Safety PrecautionsFor USA and Canada Dear Customer Business users Other Countries outside the European UnionSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Others MaintenanceCopyrights of video Saving EnergyCamera unit Name and Function of PartsReset Reset button Power supply/Alarm signal cable a PgCamera unit/Inside the camera StrapInside the camera Focus adjustment ring Iris Level Iris level adjustment dialZoom adjustment ring Lens sectionAlarm FeaturesMonitoring Via Built-in Viewer Saving Jpeg images to the FTP server at regular intervalsControl via customized application software Restrictions on ClientsMounting the Camera Overall ProceduresSelecting Mounting Method SetupMounting Method Mounting on a ceilingRemove the inner dome ConnectionRemove the outer case Loosen the pan fastening screw Mounting Image adjustment Mounting the Dome Cover Hitch the fall-prevention wire that was Configure image settings. a PgMount the fall-prevention wire on Fall-prevention wire is not suppliedTighten the Camera Fastening Screws and secure the camera Turn the camera in the clockwise directionWind the waterproof tape. a Pg Mount by allowing the cable to exit from the side ConnectingMounting the camera to the electrical box Mounting Using the PoE Power ConnectionWhat is PoE Power over Ethernet? About the power cable Connecting to the DC12 V power supply120 190 When connecting to a hub Alarm Input/Output Cable Connection When connecting to a computer LAN Cable ConnectionImage adjustment Adjusting field angle, focus and brightness Adjusting the camera shooting directionFocus adjustment Field angle adjustmentBrightness adjustment Mounting the Dome CoverNetwork Requirements Setting IP address with the default VN- C215V4U settings IP Address Settings System configuration required for setting IP address a Assigning an IP address from the Dhcp serverClick Start IP Address setting at the computerClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Top page of VN-C215V4U appears Basic page with the IP address settings appearsWhen the IP address of VN-C215V4U is unknown When the IP address of VN-C215V4U is knownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Enter the user name and password Installing the built-in viewerViewer is installed and launched Http//192.168.0.2/cgi-bin/c215viewing.cgiScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Enter the URL of the built-in viewer in the URL field Shortcut for Built-in ViewerLAN Specifications SpecificationsAttachments/Accessories GeneralSR55 Dimension Unit mminchesPage Page Camera