JVC VN-C215V4U manual

Page 5

●This installation should be made by a qualified service person and should conform to all local codes.

●This installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70.

●The unit is to be powered by an DC 12 V power supply.

●The DC 12 V power supply should conform to the following: Class 2 only (For USA), Isolated power supply only (For Europe and other).

●Any Mention in this manual of Alarm inputs/ outputs have not been evaluated by UL to be used for Burglar Alarm Functionality.

●Embedding of cameras in the ceiling may not be allowed due to regulations in some regions. Please consult your nearby authorized JVC dealer for more details.

●The ceiling to mount the camera has to be strong enough to support the weight of this product. If the ceiling is not strong enough, make sure to apply reinforcement to the ceiling before installation.

●The rating label is placed on the side of the camera unit.

●The camera unit may fall if the mounting screws and nuts are not properly tightened.Ensure that the screws and nuts are properly tightened.

●We do not accept liability for any damage to the camera in cases when it is dropped because of incomplete installation due to not observing the installation instructions correctly. Please be careful when installing the camera.

●Do not install the camera near lighting equipment with a high temperature, such as spotlights. Doing so may cause malfunction or fire.

●Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible.

●We will not provide any compensation whatsoever for the contents to be recorded or loss of opportunities when recording is not properly performed due to malfunction of the video camera, VTR, hard disk recorder or video tape.

●Prior to adjusting the shooting direction of the camera, touch the metal surface of the [MONITOR] terminal with your hand to discharge static electricity from your body.

This manual describes basic usage of VN- C215V4U.

For detailed usage of VN-C215V4U, please refer to AINSTRUCTIONSB.

For latest information, please refer to AReadmeB file in the supplied CD-ROM.

●The supplied CD-ROM includes [INSTRUCTIONS] (pdf), [API Guide] (pdf) and [Search Tool].

●To view file in pdf format, the installation of AAdobe ReaderB on the Computer is required.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Important Safeguards Safety PrecautionsFor USA and Canada Sehr geehrter Kunde, sehr geehrte Kundin Business users Other Countries outside the European UnionDear Customer Page Main Features Contents Operating Environment Others MaintenanceCopyrights of video Saving EnergyCamera unit Name and Function of PartsReset Reset button Power supply/Alarm signal cable a PgCamera unit/Inside the camera StrapInside the camera Focus adjustment ring Iris Level Iris level adjustment dialZoom adjustment ring Lens sectionAlarm FeaturesMonitoring Via Built-in Viewer Saving Jpeg images to the FTP server at regular intervalsControl via customized application software Restrictions on ClientsMounting the Camera Overall ProceduresSelecting Mounting Method  SetupMounting Method Mounting on a ceilingRemove the inner dome  ConnectionRemove the outer case Loosen the pan fastening screw Mounting the Dome Cover  Image adjustment Mounting Hitch the fall-prevention wire that was Configure image settings. a PgMount the fall-prevention wire on Fall-prevention wire is not suppliedWind the waterproof tape. a Pg Turn the camera in the clockwise directionTighten the Camera Fastening Screws and secure the camera Mounting the camera to the electrical box  ConnectingMount by allowing the cable to exit from the side  Mounting What is PoE Power over Ethernet? Power ConnectionUsing the PoE 120 190 Connecting to the DC12 V power supplyAbout the power cable  When connecting to a hub Alarm Input/Output Cable Connection When connecting to a computer LAN Cable ConnectionImage adjustment Adjusting field angle, focus and brightness Adjusting the camera shooting directionFocus adjustment Field angle adjustmentBrightness adjustment Mounting the Dome CoverNetwork Requirements Setting IP address with the default VN- C215V4U settings IP Address Settings System configuration required for setting IP address  a Assigning an IP address from the Dhcp serverClick OK on the Local Area Connection Properties screen  IP Address setting at the computerClick Start Example http//192.168.0.2 Enter the user name and password login as an administrator Top page of VN-C215V4U appears Basic page with the IP address settings appearsWhen the IP address of VN-C215V4U is unknown When the IP address of VN-C215V4U is knownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Enter the user name and password Installing the built-in viewerViewer is installed and launched Http//192.168.0.2/cgi-bin/c215viewing.cgiScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Enter the URL of the built-in viewer in the URL field Shortcut for Built-in ViewerLAN Specifications SpecificationsAttachments/Accessories GeneralSR55 Dimension Unit mminchesPage Page Camera
Top Page Image Contents