JVC VN-C215V4U manual Shortcut for Built-in Viewer

Page 43

Shortcut for Built-in Viewer

Creating a shortcut for the built-in viewer on the Desktop screen of the computer saves you the trouble of having to enter the URL in the Internet Explorer.

Create the shortcut using the procedures below.

1. Launch the Internet Explorer

2. Right-click on Internet Explorer on the screen and select [Create Shortcut]

Click the [OK] button on the confirmation screen and a shortcut will be created on the Desktop screen.

3. Right-click on the shortcut icon on the Desktop screen and select Properties

The setting screen appears.

4. Enter the URL of the built-in viewer in the URL field

For example, if the IP address of VN- C215V4U is 192.168.0.2, enter as follows:

http://192.168.0.2/cgi-bin/c215viewing.cgi

5. Click the [OK] button to end

Clicking on the shortcut created will help to save you the trouble of having to enter the URL in the Internet Explorer.

Memo：

●Before starting up the built-in viewer using the shortcut, close all Internet Explorer windows. Starting up the built-in viewer using the shortcut while leaving other Internet Explorer windows opened may result in malfunction of the built-in viewer.

43

Image 43

Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Important Safeguards Safety PrecautionsFor USA and Canada Dear Customer Business users Other Countries outside the European UnionSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Saving Energy MaintenanceOthers Copyrights of videoCamera unit Name and Function of PartsStrap Power supply/Alarm signal cable a PgReset Reset button Camera unit/Inside the cameraInside the camera Lens section Iris Level Iris level adjustment dialFocus adjustment ring Zoom adjustment ringSaving Jpeg images to the FTP server at regular intervals FeaturesAlarm Monitoring Via Built-in ViewerControl via customized application software Restrictions on ClientsMounting the Camera Overall ProceduresMounting on a ceiling SetupSelecting Mounting Method Mounting MethodLoosen the pan fastening screw ConnectionRemove the inner dome Remove the outer case Mounting Image adjustment Mounting the Dome Cover Fall-prevention wire is not supplied Configure image settings. a PgHitch the fall-prevention wire that was Mount the fall-prevention wire onTighten the Camera Fastening Screws and secure the camera Turn the camera in the clockwise directionWind the waterproof tape. a Pg Mount by allowing the cable to exit from the side ConnectingMounting the camera to the electrical box Mounting Using the PoE Power ConnectionWhat is PoE Power over Ethernet? About the power cable Connecting to the DC12 V power supply120 190 LAN Cable Connection Alarm Input/Output Cable Connection When connecting to a hub When connecting to a computerImage adjustment Adjusting field angle, focus and brightness Adjusting the camera shooting directionMounting the Dome Cover Field angle adjustmentFocus adjustment Brightness adjustmentNetwork Requirements a Assigning an IP address from the Dhcp server IP Address SettingsSetting IP address with the default VN- C215V4U settings System configuration required for setting IP addressClick Start IP Address setting at the computerClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Top page of VN-C215V4U appears Basic page with the IP address settings appearsWhen the IP address of VN-C215V4U is unknown When the IP address of VN-C215V4U is knownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Http//192.168.0.2/cgi-bin/c215viewing.cgi Installing the built-in viewerEnter the user name and password Viewer is installed and launchedScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Enter the URL of the built-in viewer in the URL field Shortcut for Built-in ViewerGeneral SpecificationsLAN Specifications Attachments/AccessoriesSR55 Dimension Unit mminchesPage Page Camera