JVC VN-C215V4U manual Main Features

Page 6

Introduction

Main Features

High Picture Quality

The camera unit of VN-C215V4U employs a 380,000-pixel CCD (1/4") which enables high quality image monitoring.

Wide shooting range

The adjustment range of the shooting direction is wide and the camera can be mounted on a wall with the use of a rotation adjustment mechanism.

Unblocked Design

The dome-shaped design enables ease of use without being blocked by the camera.

Embed in ceiling without use of brackets

The camera unit can be embedded in the ceiling without the use of recess brackets.

High-power varifocal lens

The built-in varifocal lens (optical zoom 3.6x) makes detailed surveillance possible.

Night surveillance

VN-C215V4U comes with a low luminance feature (Easy Day and Night), which switches automatically to the high sensitivity mode (black- and-white) under low illumination.

Support for PoE (Power over Ethernet)

VN-C215V4U supports PoE (IEEE802.3af) and enables power supply from a LAN cable.

Realization of Full Frame Rate

Data transmission is possible in VGA size at a rate of 30 fps.

Built-in Web Server

Setting is possible using the Internet Explorer.

Support for Multicast

VN-C215V4U supports multicast, which enables transmission of an image data to multiple computers on the network without lowering the frame rate.

Motion Detection Feature

This feature enables output of an alarm upon detection of motion in the image within a preset area.

Pre-recorded/post-recorded image files can be sent via FTP using the alarm input.

Built-in Viewer

Monitoring via a computer is possible by downloading the built-in viewer onto the computer.

HTTP-based API

VN-C215V4U comes with a HTTP-based API. This feature enables setting and control via the network.

How to view this manual

Symbols used

Note : Describes items concerning the operation of this product.

Memo : Describes reference information, such as functions and usage restrictions of this product.

A: Indicates the reference page numbers and reference items.

About the contents of this manual

●All rights reserved by JVC. Unauthorized duplication or reprinting of this manual, in whole or in part, is strictly prohibited.

●Windows is a registered trademark of Microsoft Corporation in the U.S.

●All other product names used in this manual are trademarks or registered trademarks of their respective companies. Note that marks such as ,  and  have been omitted in this manual.

●Illustrated designs, specifications and other contents of this manual are subject to change for improvement without prior notice.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Safety Precautions Important Safeguards For USA and Canada Business users Other Countries outside the European Union Dear CustomerSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Copyrights of video MaintenanceOthers Saving EnergyName and Function of Parts Camera unitCamera unit/Inside the camera Power supply/Alarm signal cable a PgReset Reset button StrapInside the camera Zoom adjustment ring Iris Level Iris level adjustment dialFocus adjustment ring Lens sectionMonitoring Via Built-in Viewer FeaturesAlarm Saving Jpeg images to the FTP server at regular intervalsRestrictions on Clients Control via customized application softwareOverall Procedures Mounting the CameraMounting Method  SetupSelecting Mounting Method Mounting on a ceilingRemove the outer case  ConnectionRemove the inner dome Loosen the pan fastening screw Image adjustment  Mounting Mounting the Dome Cover Mount the fall-prevention wire on Configure image settings. a PgHitch the fall-prevention wire that was Fall-prevention wire is not suppliedTurn the camera in the clockwise direction Tighten the Camera Fastening Screws and secure the cameraWind the waterproof tape. a Pg  Connecting Mount by allowing the cable to exit from the sideMounting the camera to the electrical box  Mounting Power Connection Using the PoEWhat is PoE Power over Ethernet? Connecting to the DC12 V power supply About the power cable120 190  When connecting to a computer Alarm Input/Output Cable Connection When connecting to a hub LAN Cable ConnectionImage adjustment Adjusting the camera shooting direction Adjusting field angle, focus and brightnessBrightness adjustment Field angle adjustmentFocus adjustment Mounting the Dome CoverNetwork Requirements  System configuration required for setting IP address IP Address SettingsSetting IP address with the default VN- C215V4U settings  a Assigning an IP address from the Dhcp server IP Address setting at the computer Click StartClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Basic page with the IP address settings appears Top page of VN-C215V4U appearsWhen the IP address of VN-C215V4U is known When the IP address of VN-C215V4U is unknownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Viewer is installed and launched Installing the built-in viewerEnter the user name and password Http//192.168.0.2/cgi-bin/c215viewing.cgiScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Shortcut for Built-in Viewer Enter the URL of the built-in viewer in the URL fieldAttachments/Accessories SpecificationsLAN Specifications GeneralDimension Unit mminches SR55Page Page Camera
Top Page Image Contents