JVC VN-C215V4U manual Power Connection, Using the PoE, What is PoE Power over Ethernet?

Page 24

Setup

Power Connection

Electricity can be supplied to this product either by using the PoE or connecting to the DC12 V power supply.

When electricity is supplied to the camera, the status indicator blinks, and turns off when startup is complete.

Note：

●Make sure to select only one mode of electrical supply. Connecting the power cable and the LAN cable for the PoE at the same time may result in failure or malfunction of the camera.

Using the PoE

Connect to a device that supports PoE and supply electricity from the LAN cable.

What is PoE (Power over Ethernet)?

This is a function that enables operation of a LAN equipment without a power cable by supplying power simultaneously with the data using a LAN cable.

Connect to PoE- compatible device

Memo：

●For details on the connection method and cable type, please refer to ALAN Cable ConnectionB (A Pg. 26).

24

Image 24

Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Safety Precautions Important SafeguardsFor USA and Canada Business users Other Countries outside the European Union Dear CustomerSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Maintenance OthersCopyrights of video Saving EnergyName and Function of Parts Camera unitPower supply/Alarm signal cable a Pg Reset Reset buttonCamera unit/Inside the camera StrapInside the camera Iris Level Iris level adjustment dial Focus adjustment ringZoom adjustment ring Lens sectionFeatures AlarmMonitoring Via Built-in Viewer Saving Jpeg images to the FTP server at regular intervalsRestrictions on Clients Control via customized application softwareOverall Procedures Mounting the Camera Setup Selecting Mounting MethodMounting Method Mounting on a ceiling Connection Remove the inner domeRemove the outer case Loosen the pan fastening screw Image adjustment Mounting Mounting the Dome Cover Configure image settings. a Pg Hitch the fall-prevention wire that wasMount the fall-prevention wire on Fall-prevention wire is not suppliedTurn the camera in the clockwise direction Tighten the Camera Fastening Screws and secure the cameraWind the waterproof tape. a Pg Connecting Mount by allowing the cable to exit from the sideMounting the camera to the electrical box Mounting Power Connection Using the PoEWhat is PoE Power over Ethernet? Connecting to the DC12 V power supply About the power cable120 190 Alarm Input/Output Cable Connection When connecting to a hub When connecting to a computer LAN Cable ConnectionImage adjustment Adjusting the camera shooting direction Adjusting field angle, focus and brightnessField angle adjustment Focus adjustmentBrightness adjustment Mounting the Dome CoverNetwork Requirements IP Address Settings Setting IP address with the default VN- C215V4U settings System configuration required for setting IP address a Assigning an IP address from the Dhcp server IP Address setting at the computer Click StartClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Basic page with the IP address settings appears Top page of VN-C215V4U appearsWhen the IP address of VN-C215V4U is known When the IP address of VN-C215V4U is unknownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Installing the built-in viewer Enter the user name and passwordViewer is installed and launched Http//192.168.0.2/cgi-bin/c215viewing.cgiScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Shortcut for Built-in Viewer Enter the URL of the built-in viewer in the URL fieldSpecifications LAN SpecificationsAttachments/Accessories GeneralDimension Unit mminches SR55Page Page Camera