JVC VN-C215V4U manual Installing the built-in viewer, Http//192.168.0.2/cgi-bin/c215viewing.cgi

Page 40

Operation

Operation of Built-in Viewer (continued)

Installing the built-in viewer

1. Enter the URL of the built-in viewer in the address field of Internet Explorer

For example, if the IP address of VN-C215V4U is 192.168.0.2, enter as follows:

http://192.168.0.2/cgi-bin/c215viewing.cgi

A Enter the URL of the built-in viewer of this camera.		BSelect [Go]
	(The default URL is http://192.168.0.2/cgi-bin/
	c215viewing.cgi)

http://192.168.0.2/cgi-bin/c215viewing.cgi

2. Enter the user name and password

VN-C215

A Enter the user name.

This is set to AadminB by default.

B Enter the password.

This is set to Avn-c215Bby default.

C Click [OK].

3. The viewer is installed and launched

Image 40

Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Safety Precautions Important SafeguardsFor USA and Canada Dear Customer Business users Other Countries outside the European UnionSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Maintenance OthersCopyrights of video Saving EnergyName and Function of Parts Camera unitPower supply/Alarm signal cable a Pg Reset Reset buttonCamera unit/Inside the camera StrapInside the camera Iris Level Iris level adjustment dial Focus adjustment ringZoom adjustment ring Lens sectionFeatures AlarmMonitoring Via Built-in Viewer Saving Jpeg images to the FTP server at regular intervalsRestrictions on Clients Control via customized application softwareOverall Procedures Mounting the Camera Setup Selecting Mounting MethodMounting Method Mounting on a ceiling Connection Remove the inner domeRemove the outer case Loosen the pan fastening screw Mounting Image adjustment Mounting the Dome Cover Configure image settings. a Pg Hitch the fall-prevention wire that wasMount the fall-prevention wire on Fall-prevention wire is not suppliedTighten the Camera Fastening Screws and secure the camera Turn the camera in the clockwise directionWind the waterproof tape. a Pg Mount by allowing the cable to exit from the side ConnectingMounting the camera to the electrical box Mounting Using the PoE Power ConnectionWhat is PoE Power over Ethernet? About the power cable Connecting to the DC12 V power supply120 190 Alarm Input/Output Cable Connection When connecting to a hub When connecting to a computer LAN Cable ConnectionImage adjustment Adjusting the camera shooting direction Adjusting field angle, focus and brightnessField angle adjustment Focus adjustmentBrightness adjustment Mounting the Dome CoverNetwork Requirements IP Address Settings Setting IP address with the default VN- C215V4U settings System configuration required for setting IP address a Assigning an IP address from the Dhcp serverClick Start IP Address setting at the computerClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Basic page with the IP address settings appears Top page of VN-C215V4U appearsWhen the IP address of VN-C215V4U is known When the IP address of VN-C215V4U is unknownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Installing the built-in viewer Enter the user name and passwordViewer is installed and launched Http//192.168.0.2/cgi-bin/c215viewing.cgiScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Shortcut for Built-in Viewer Enter the URL of the built-in viewer in the URL fieldSpecifications LAN SpecificationsAttachments/Accessories GeneralDimension Unit mminches SR55Page Page Camera