Mounting
1. Face the imaging direction mark (j) in the shooting direction and mount the camera. 2. Secure the camera in 3 locations.
A Use a cross slot screw driver to push the screw head of the ceiling mounting bracket right in.
B While holding onto the screwdriver, turn it approximately 90 degrees in the clockwise direction. Pull out the screwdriver when it stops.
C The ceiling mounting bracket is lodged on the ceiling and the camera is secured.
Memo：
●To remove the camera, turn the screw head of the ceiling mounting bracket (3 locations) 90 degrees in the
Image adjustment
When the camera is mounted, adjust the image settings while looking at the actual image.
(A Pg.27 eImage adjustmentf)
Mounting the Dome Cover
After the image adjustment is completed, mount the dome cover.
Installation is complete when the dome cover is mounted.
(A Pg.29 eMounting the Dome Coverf)
1
FRONTPU
Towards the shooting direction
2 
B
A
19