JVC VN-C215V4U manual Others, Copyrights of video, Maintenance, Saving Energy

Page 9

Others

This product has a built-in AGC circuit. When AGC is AOnB, the product sensitivity increases automatically at dark places and the image on the screen may appear grainy. This is not a malfunction.

When White Balance is set to AAutoB, the principle of automatic tracking white balance circuit may cause the color of the image to be different from the actual color of the object, depending on the condition of the object. However, this is not a malfunction.

If a high-intensity object (such as a lamp) is shot, vertical lines may appear on the image (smear phenomenon) or blurring may occur around the high-intensity object (blooming phenomenon). This is a CCD characteristic and is not a malfunction.

The electronic shutter of this product is set to 1/60 by default. To prevent flickering under fluorescent lighting (except inverter illumination) in a location with commercial power frequency of 50 Hz, switch the shutter speed to 1/100. (The sensitivity decreases a little when the shutter speed is 1/100.)

When Easy Day and Night is set to AOnB, the image becomes black and white in dark locations. As the sensitivity is increased at this time, the screen may appear grainy and white spots may also increase. In addition, when color images are changed to black and white, bright areas of the screen are emphasized and they may be difficult to see. However, this is not a malfunction.

The image may be distorted or be mixed with noises when the power voltage is cut off instantaneously or is lowered by a lightning strike or by switching on an air conditioner.

The rotation angle of this product is set to wide angle to support wide range equipment. When the lens zoom is wide and the tilt angle is approximately ±80 , the rotation angle may cause the dome cover to be reflected in the image. In this case, adjust the field angle if required. (A Pg. 29)

When multicast is in use, use the IGMPv2- compliant network switch.

Electricity can be supplied to this product either by using the PoE or connecting to the DC12 V power supply. Make sure to select only one mode of electrical supply. Connecting the power cable and the LAN cable for the PoE at the same time may result in failure or malfunction of the camera.

(A Pg. 24, 25)

Copyrights of video

With the exception of the user being the copyright holder or when permission has been granted concerning duplication, etc. by the copyright holder, permission is required in principle for the duplication, modification, transmission, etc. of copyrighted video/audio. Unauthorized duplication, modification, transmission, etc. of copyrighted material may constitute a copyright infringement and the user may be liable to compensate for any damages. When using copyrighted video/ audio, be sure to check thoroughly the license agreement, etc. of the copyrighted material.

When there are rights or rights holders of the duplicating subject, permission may be required for shooting or using (processing) it. Be sure to check thoroughly the licensing conditions.

Maintenance

Be sure to turn off the power before performing maintenance.

Wipe using a soft cloth.

Wiping with thinner or benzene may dissolve or tarnish its surface. For dirt that cannot be easily removed, wipe using a neutral detergent diluted with water, followed by wiping with a dry cloth.

Saving Energy

When not in use for a long period, turn off the power of the system to prevent risk and to reduce power consumption.

9

Image 9
Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Important Safeguards Safety PrecautionsFor USA and Canada Business users Other Countries outside the European Union Dear CustomerSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Others MaintenanceCopyrights of video Saving EnergyCamera unit Name and Function of PartsReset Reset button Power supply/Alarm signal cable a PgCamera unit/Inside the camera StrapInside the camera Focus adjustment ring Iris Level Iris level adjustment dialZoom adjustment ring Lens sectionAlarm FeaturesMonitoring Via Built-in Viewer Saving Jpeg images to the FTP server at regular intervalsControl via customized application software Restrictions on ClientsMounting the Camera Overall ProceduresSelecting Mounting Method  SetupMounting Method Mounting on a ceilingRemove the inner dome  ConnectionRemove the outer case Loosen the pan fastening screw Image adjustment  Mounting Mounting the Dome Cover Hitch the fall-prevention wire that was Configure image settings. a PgMount the fall-prevention wire on Fall-prevention wire is not suppliedTurn the camera in the clockwise direction Tighten the Camera Fastening Screws and secure the cameraWind the waterproof tape. a Pg  Connecting Mount by allowing the cable to exit from the sideMounting the camera to the electrical box  Mounting Power Connection Using the PoEWhat is PoE Power over Ethernet? Connecting to the DC12 V power supply About the power cable120 190  When connecting to a hub Alarm Input/Output Cable Connection When connecting to a computer LAN Cable ConnectionImage adjustment Adjusting field angle, focus and brightness Adjusting the camera shooting directionFocus adjustment Field angle adjustmentBrightness adjustment Mounting the Dome CoverNetwork Requirements Setting IP address with the default VN- C215V4U settings IP Address Settings System configuration required for setting IP address  a Assigning an IP address from the Dhcp server IP Address setting at the computer Click StartClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Top page of VN-C215V4U appears Basic page with the IP address settings appearsWhen the IP address of VN-C215V4U is unknown When the IP address of VN-C215V4U is knownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Enter the user name and password Installing the built-in viewerViewer is installed and launched Http//192.168.0.2/cgi-bin/c215viewing.cgiScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Enter the URL of the built-in viewer in the URL field Shortcut for Built-in ViewerLAN Specifications SpecificationsAttachments/Accessories GeneralSR55 Dimension Unit mminchesPage Page Camera