JVC VN-C215V4U IP Address Settings, Setting IP address with the default VN- C215V4U settings

Page 31

IP Address Settings

Setting IP address with the default VN- C215V4U settings

There are 2 methods to set the IP address when VN-C215V4U is in its default settings.

(A)Assigning an IP address to VN-C215V4Ufrom the DHCP server

(B)Assigning a static IP address to VN- C215V4U

(A) Assigning an IP address from the DHCP server

●VN-C215V4U is set to ADHCP EnableB (the DHCP client function is ON) by default. To assign an IP address from DHCP server, connect VN-C215V4U to LAN with DHCP server, and turn on VN-C215V4U. Allowing the DHCP server to assign the same IP address to VN-C215V4U every time eases access to VN-C215V4U.

●For details on IP addresses assigned to VN- C215V4U, please consult your network administrator.

●You can look up the IP address of VN- C215V4U using the [Search Tool] in the attached CD-ROM.

For details, please refer to the AReadmeB file in the attached CD-ROM.

Note：

●Set the DHCP server such that constant IPaddress is assigned to VN-C215V4U based on the MAC address of VN-C215V4U. Access by clients can fail if the above setting is not performed.

(B) Assigning a static IP address

System configuration required for setting IP address

VN-C215V4U is set to ADHCP EnableB (the DHCP client function is ON) by default. Start VN-C215V4Uin LAN without DHCP server. After DHCP timeout, VN-C215V4U starts with the following IP address.

IP address	: 192.168.0.2
Subnet mask	: 255.255.255.0
Default gateway	: None

Memo：

●To set a static IP address for VN-C215V4U, connect VN-C215V4U, switching hub and computer for setting using a straight LAN cable of Category 5 and above.

Set up the computer for setting the IP address.

●Minimum computer specifications for setting

OS	: Windows XP (Professional
	or Home Edition) (SP2)

Web browser : Internet Explorer Version 6.0

Note：

●When setting the IP address for VN- C215V4U, do so by using a network that is made up only of VN-C215V4U, the computer for setting and the switching hub.

●Using a hub connected to other network devices can cause problems.

31

Image 31

Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Important Safeguards Safety PrecautionsFor USA and Canada Dear Customer Business users Other Countries outside the European UnionSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Saving Energy MaintenanceOthers Copyrights of videoCamera unit Name and Function of PartsStrap Power supply/Alarm signal cable a PgReset Reset button Camera unit/Inside the cameraInside the camera Lens section Iris Level Iris level adjustment dialFocus adjustment ring Zoom adjustment ringSaving Jpeg images to the FTP server at regular intervals FeaturesAlarm Monitoring Via Built-in ViewerControl via customized application software Restrictions on ClientsMounting the Camera Overall ProceduresMounting on a ceiling SetupSelecting Mounting Method Mounting MethodLoosen the pan fastening screw ConnectionRemove the inner dome Remove the outer case Mounting Image adjustment Mounting the Dome Cover Fall-prevention wire is not supplied Configure image settings. a PgHitch the fall-prevention wire that was Mount the fall-prevention wire onTighten the Camera Fastening Screws and secure the camera Turn the camera in the clockwise directionWind the waterproof tape. a Pg Mount by allowing the cable to exit from the side ConnectingMounting the camera to the electrical box Mounting Using the PoE Power ConnectionWhat is PoE Power over Ethernet? About the power cable Connecting to the DC12 V power supply120 190 LAN Cable Connection Alarm Input/Output Cable Connection When connecting to a hub When connecting to a computerImage adjustment Adjusting field angle, focus and brightness Adjusting the camera shooting directionMounting the Dome Cover Field angle adjustmentFocus adjustment Brightness adjustmentNetwork Requirements a Assigning an IP address from the Dhcp server IP Address SettingsSetting IP address with the default VN- C215V4U settings System configuration required for setting IP addressClick Start IP Address setting at the computerClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Top page of VN-C215V4U appears Basic page with the IP address settings appearsWhen the IP address of VN-C215V4U is unknown When the IP address of VN-C215V4U is knownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Http//192.168.0.2/cgi-bin/c215viewing.cgi Installing the built-in viewerEnter the user name and password Viewer is installed and launchedScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Enter the URL of the built-in viewer in the URL field Shortcut for Built-in ViewerGeneral SpecificationsLAN Specifications Attachments/AccessoriesSR55 Dimension Unit mminchesPage Page Camera