Setup
Image adjustment (continued)
Adjusting the camera shooting direction
This camera can be adjusted for pan, tilt and rotation. Adjust the direction and face the camera towards the object.
Note：
●Make sure you touch the metal surface of the [MONITOR] terminal to release the static electricity in your body before adjusting the camera shooting direction.
●Make sure that the pan fastening screw is loosened before adjusting the camera shooting direction. The lens section may be damaged if you operate it without loosening the pan fastening screw.
Pan: ±175
Memo：
●Rotate both pan and rotation ±175 from the positions aligned with the camera imaging direction mark, pan center mark and rotation center mark. Make sure you hold the rotation claps and adjust the rotation without holding the lens section.
●After adjusting the field angle, tighten and secure the tilt fastening screw and pan fastening screw so that the field angle will not be misaligned when using the camera in locations with vigorous vibrations. (A Pg. 12)
Note：
●Moving the camera when it has exceeded the adjustment range may cause its performance to deteriorate.
●As the tilt and rotation range of this camera is wide, part of the camera may be reflected in the shooting screen depending on the field angle and direction.
●Do not hold the lens section when adjusting the camera direction. The lens section may be damaged if you apply force to it.
Adjusting field angle, focus and brightness
Once you have decided the shooting direction, you can adjust the field angle, focus and brightness.
Rotation: ±175
SPOT
SADJ
SADJ
CE
H
IRIS
EVEL
Tilt: ±80
Imaging Direction mark
Pan center mark
Rotation center mark
Pan fastening screw :Be sure to loosen it before adjustment.
Rotation Knob :Make sure you hold and turn this knob when adjusting the rotation.
|
| Focus adjustment |
FOCUS ADJUST |
| button |
|
| |
|
| Iris level |
L | H | adjustment dial |
IRIS
LEVEL
Zoom adjustment ring
W
T
Focus adjustment ring
N
F
28