JVC VN-C215V4U manual Enter the user name and password login as an administrator

Page 34

Setting

IP Address Settings (continued)

Changing the IP address using the Internet Explorer (continued)

4. Launch the Internet Explorer

A Enter the following IP address in the address field.		B Click [Go].
	http://192.168.0.2

Memo：

●If the proxy server setting in Internet Explorer is enabled, you may not be able to specify the IP address directly. In this case, change the proxy settings of the Internet Explorer.

●After the Security Warning screen appears, press the [OK] button to proceed.

5. Enter the user name and password (login as an administrator)

VN-C215

A Enter the user name.

This is set to AadminB by default.

B Enter the password.

This is set to Avn-c215Bby default.

CClick [OK].

Memo：

●After the Security Alarm screen appears, press the [Yes] button to proceed.

34

Image 34

Contents Fixed IP Dome Camera VN-C215V4USTART-UP Guide Safety Precautions Important SafeguardsFor USA and Canada Dear Customer Business users Other Countries outside the European UnionSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Copyrights of video MaintenanceOthers Saving EnergyName and Function of Parts Camera unitCamera unit/Inside the camera Power supply/Alarm signal cable a PgReset Reset button StrapInside the camera Zoom adjustment ring Iris Level Iris level adjustment dialFocus adjustment ring Lens sectionMonitoring Via Built-in Viewer FeaturesAlarm Saving Jpeg images to the FTP server at regular intervalsRestrictions on Clients Control via customized application softwareOverall Procedures Mounting the CameraMounting Method SetupSelecting Mounting Method Mounting on a ceilingRemove the outer case ConnectionRemove the inner dome Loosen the pan fastening screw Mounting Image adjustment Mounting the Dome Cover Mount the fall-prevention wire on Configure image settings. a PgHitch the fall-prevention wire that was Fall-prevention wire is not suppliedTighten the Camera Fastening Screws and secure the camera Turn the camera in the clockwise directionWind the waterproof tape. a Pg Mount by allowing the cable to exit from the side ConnectingMounting the camera to the electrical box Mounting Using the PoE Power ConnectionWhat is PoE Power over Ethernet? About the power cable Connecting to the DC12 V power supply120 190 When connecting to a computer Alarm Input/Output Cable Connection When connecting to a hub LAN Cable ConnectionImage adjustment Adjusting the camera shooting direction Adjusting field angle, focus and brightnessBrightness adjustment Field angle adjustmentFocus adjustment Mounting the Dome CoverNetwork Requirements System configuration required for setting IP address IP Address SettingsSetting IP address with the default VN- C215V4U settings a Assigning an IP address from the Dhcp serverClick Start IP Address setting at the computerClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Basic page with the IP address settings appears Top page of VN-C215V4U appearsWhen the IP address of VN-C215V4U is known When the IP address of VN-C215V4U is unknownOperation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Viewer is installed and launched Installing the built-in viewerEnter the user name and password Http//192.168.0.2/cgi-bin/c215viewing.cgiScreen Configuration of Built-in Viewer Quitting the Built-in Viewer Shortcut for Built-in Viewer Enter the URL of the built-in viewer in the URL fieldAttachments/Accessories SpecificationsLAN Specifications GeneralDimension Unit mminches SR55Page Page Camera